How To Reset Netgear N150 Router To Factory Settings

A factory reset deletes all the customized settings on your Netgear router including your username, Wi-Fi network name, password, and security settings. You can do a factory reset if you cannot recover your password. Before you perform on how to reset Netgear N150 router to factory settings, power on your router. There is a physical Reset button available on the Netgear N150 router that enables you to reset the router quickly. Locate the Reset button on the Netgear N150 router and press it to reset the router.

How To Reset Netgear Router N150

  • Power on the Netgear N150 router to perform a factory reset.
  • If you do a factory reset on your router, it deletes the personalized settings.
  • Ensure that the Power light is On before you proceed to reset.
  • Turn the router to the rear side and search for the Reset button.
  • Use a paper clip or sharp tool to press and hold the Reset button for 5-10 seconds.
  • Release the Reset or Restore Factory Settings button.
  • Wait until your Netgear N150 router resets.
  • Restart your Netgear N150 router and launch the setup page on your computer.
  • On the setup page, change the router’s settings.
  • Click Apply to save the settings.
how to reset netgear n150 router to factory settings

Steps For How To Reset Netgear N150 Router To Factory Settings

  • To reset the Netgear N150 router to factory settings, unplug the power cord from your router and verify that all the lights are inactive.
  • Search for the Reset button hole near the USB port of the router.
  • Power on the Netgear N150 router and proceed to reset it with the guide of how to reset Netgear N150 router to factory settings.
  • Press the Reset button hole using a paper clip or a sharp tool and continue to do it for 10 to 20 seconds.
  • Now, your router will delete its personalized settings and revert the factory settings.
  • Ensure that the Internet light is active and the Netgear router appears in the ready state.
  • If you are using a wired connection, fix the cables back into the respective ports, and launch the setup page.
  • Enter the Netgear N150 router’s default username and password.
  • You can also do a Cold Reset to restore the factory defaults.
  • To do a cold reset, unplug all the cords from the Netgear N150 router.
  • After 20 seconds, plug the power cable back into the power supply.
  • Fix all the other required cables and turn on the Netgear N150 router.
  • The other method to reset the Netgear N150 router is to do a Hard Reset.
  • Press and hold the Factory Reset button for 30 seconds and the Power light will blink when you do so.
  • Wait until the Power indicator stops blinking and then connect the power cord back into the router.
  • By doing the above steps, your router restores factory defaults.
  • Open a web browser to check the connectivity.

Netgear N150 Change Password

To change the Netgear N150 password, launch the Netgear Smart Wizard on your computer or smartphone. Before you proceed to change the password, note the Netgear N150 router’s IP Address. Don’t forget to enable the Password Recover option when you set a new password.

Reset Netgear N150 Wireless Router Password

  • Power on your Netgear N150 router.
  • On your computer or smartphone, launch a web browser.
  • Enter the Netgear N150 router’s IP Address in the Address field.
  • The default IP Addresses for the Netgear router is 192.168.1.1 and 192.168.1.1.
  • On the Authentication dialog box, enter the username and password.
  • The predefined Username is admin and password is password.
  • Click Enter and the setup page of your Netgear N150 router will appear.
  • Select the Setup tab and click Wireless Settings.
  • Change the SSID name if required and enter your new Passphrase.
  • Click Apply to save the new password of the Netgear N150 router.

How To Reset Netgear N150 Wireless Router WNR1000

  • Once you start the procedure of how to reset Netgear N150 router to factory settings, itwill delete all the personalized setting on your Netgear N150 router.
  • To do so, power on your router.
  • Ensure that the Power light is flashing on the router.
  • Search for the Factory Reset button at the rear of the router.
  • Use a paper clip or a sharp tool to press the Reset button.
  • Press and hold the Reset or Restore Factory Settings button for 7-10 seconds.
  • Now, your router restores the factory settings.
  • Launch the Netgear N150 router’s setup page.
  • Log into the setup page using the default name and password.
  • Initialize the new settings on your router.

How To Hard Reset Netgear Rangemax N150

  • Power on the Netgear Rangemax N150 router.
  • If you reset the router, the personalized settings will be deleted.
  • Without any further delay, you can proceed to reset the router.
  • Search for the Reset button at the rear of the router.
  • Use a pen or a sharp tool to press the button.
  • Press the Reset button that is located next to the USB port.
  • Hold the button for 5-10 seconds and release it.
  • Your router will restore the factory settings.
how to hard reset netgear rangemax n150 router

Netgear N150 Wireless Router Setup Manual Download

The manual is a document that contains all the technical details related to the Netgear router. You can make use of it if you want to set up and troubleshoot the router. It is provided to you at the time of purchase. If you have lost or misplaced it, you can download it from this website. Specify the model of the Netgear router and click the Download button to download the manual on your device successfully.

Netgear N150 Router Troubleshooting

  • Initially, check if your Internet Service Provider is providing proper signals to the router. Contact your ISP if you have problems with the signals.
  • If you have connected via a wireless connection, then disconnect the computer and router from the network. Connect them through a wired connection.
  • Next, reboot the computer and turn it on to verify if you have resolved the issue.
  • Reboot the router in the next step. Go the Web management page of the router by entering the router’s IP address in the search bar of Google Chrome. Do not modify any settings. Click the Apply button. The router will then restart and turn on with the same settings.
  • Connect your computer to the router directly. The router acts as a medium between the modem and the device. So, remove the router and associate it with the modem.
  • Reset the router with the help of the Reset button present at the rear side of the router.
  • If you still face any problems on how to reset Netgear N150 router to factory settings, then contact our technical team for further assistance.

Related Articles

FAQ

Use the Netgear Smart Wizard to set up the Netgear router.

Connect your broadband modem to the Netgear router’s internet port.

Link the computer's Ethernet cable to any one of the four LAN ports available on the router.

Power on the router, computer, & broadband modem, and wait until the booting process completes.

Launch a web browser on your smartphone or computer.

Enter the Netgear router’s IP Address in the Address bar.

The Netgear router's dedault IP address is 192.168.0.1.

On the Authentication page, enter the Username and password.

Click the Setup Wizard menu and select Yes.

Choose Next and the Setup Wizard detects the type of connection.

For a wired connection, the Setup Wizard detects Dynamic IP.

Click Next to save the settings and do not alter the default settings unless the ISP has given you a specific DNS.

To check the internet connection status, click the Maintenance tab.

elect Router Status to view the Internet Connection status. Also get guide for how to reset Netgear N150 router to factory settings, from our techies

The Netgear 95 might be some random open network.

If you can access Netgear 95, then it is not protected.

It is recommended not to use an unauthorized network.

An unauthorized network can harm your device and steal personal information from you.

If the network seems to be a known network, then you can advise the concerned person to secure it with an encryption key.

Power on your computer and connect to the Netgear router.

It is recommended to use an Ethernet cable to connect your computer to the router during the firmware update.

Launch a web browser on your computer and enter the router’s IP address.

The default IP Address for Netgear router is 192.168.0.1.

Enter the username & password in the Authentication page and select Login.

Click the Advanced tab and select Administration.

Select the Router Update or Firmware Update option.

Click Check and the router will search for new firmware details.

If any latest version of firmware is available, it displays a message seeking permission to download and install it.

Click Yes and the router downloads the latest firmware and updates it.

To avoid firmware corruption, do not interrupt the process.

Once the update is complete, your Netgear router will restart.

The entire firmware update process takes about five minutes.

A Wi-Fi router is a device that can provide access to the internet or private network.

You will see that the router consists of two antennas protruding from it.

Antennas can provide better coverage to every nook and corner of your house or office.

If you equip a Wi-Fi router, you can access it using network management apps.

Wi-Fi routers are not limited to cableless connections, they can also support Ethernet connection.

You can connect the router and computer using an Ethernet cable.

An Ethernet cable will look like a standard telephone wire.

To access your Wi-Fi connection, it is recommended to place the router in an elevated position.

Set a Username and password to safeguard your wireless router.

You will be prompted to enter the router’s name and password when you try to pair a device.

You can pair multiple devices like smartphones, tablets, PCs, streaming devices, and smart TVs to a Wi-Fi network. Need more solutions that relates to how to reset Netgear N150 router to factory settings, our tech guides are here to assist you.

Top