How To Accessing Linksys Wifi Extender

To accessing Linksys wifi extender, it have a set of extenders to extend the Wi-Fi signal to a longer range. All you have to do is, connect it to your existing router and position it properly. Your office or house might have dead spots where the Wi-Fi signal will be very weak. In such cases, the signal can be strengthened by installing an extender. These extenders can easily eliminate the dead spots and provide strong Wi-Fi signals to all the corners. Linksys currently manufacture several extender models based on the needs of the customer.

What Is A Linksys Wifi Range Extender ?

Linksys Wi-Fi extenders are range extenders that can spread the Wi-Fi signal to all the rooms and clear the dead spots in your surroundings. Once you connect the extender to your router, the extender will boost your Wi-Fi signal and deliver signal to all the dead zones. Perform the initial setup and you will able to use it effectively. It also comes with Spot Finder Technology which lets you find the best place to fit your extender. Install the Spot Finder software on your mobile and get to know the optimal place and how to accessing Linksys wifi extender.

Extend Range Of Wifi In Linksys

  • Extending the Wi-Fi signal up to 7,500 square feet is the main work of a Linksys Wi-Fi extender.
  • Increase the range of the signal with the following steps given below.
  • Place your Linksys router in an open space to receive strong signals.
  • Modify the wireless channel to improve the range of the router.
  • Update the router firmware immediately.
  • Upgrading the driver of your wireless adapter will escalate the range.
  • Replace the router’s antenna if you want the range to be extended.
  • Following the above-mentioned steps will help you increase the range of the extender.

How To Extend A Wireless Network With A Linksys Router ?

  • Before you set up your extender, make sure you have acquired the following information.
  • Get to know the wireless network name, wireless channel, and the wireless password or Security key.
  • The above-mentioned details can be collected by following any one of the four methods.
  • Using a web setup page
  • Go to the Setup page on your system and choose the Wireless tab.
  • The configuration view has to be set to Manual so that you can access the network settings.
  • Note down the network name, channel, and security key.
  • Using Linksys connect
  • Open the Linksys Connect on your system by clicking start from the desktop.
  • Choose All Programs under Start and then select Linksys Connect.
  • Tap the Router Settings option and click on Personalize.
  • The router name and password will be displayed there.
  • In the next step to accessing Linksys wifi extender, associate your computer and extender with the help of an Ethernet cable.
  • Attach the Linksys extender to the power supply using a power cord.
  • Launch a web browser by double-clicking on the Browser icon and keying in the router’s IP address.
  • In the next prompt, leave the User Name field blank and enter Admin in the field provided for Password.
  • Navigate to Wireless Settings and choose Basic Wireless Settings.
  • Under Configuration View, select the checkbox near the Manual option.
  • Next, go to the Wireless Security menu and enter a password of your choice.
  • Save your settings; disconnect the router and the extender from the power supply.
  • After 30 seconds, associate them with the wall power socket. Wait until all the lights stop blinking.
accessing linksys wifi extender

What Is The Best Way To Extend The Wifi Range Of My Linksys E2500 ?

Firstly, you have to place your router in an open area. Wireless signals will find it hard to penetrate through metal or dense objects. If there any many obstructions between your computer and Linksys router, then the router will not be able to pass through it. Remove the objects that create interference to extend the range. Place it in the central position to avoid weak signals. Try to change the Wireless channel of your router. Your router will make use of a particular channel to send data and receive it. If multiple routers are using the same wireless channel, then it will be difficult for the router to reach every corner. You can utilize a free tool to locate an open channel nearby to accessing Linksys wifi extender. Updating the firmware of your router is another important method to increase the range. A router is also a hardware device that will need upgrading from time to time. Every update released by the manufacturer of the router will have bug fixes and enhanced features. So make sure that you install each and every update released by the manufacturer. Replace the antenna of your router to improve the range. Avoid placing the antenna near your wall because the signal will be lost when it is positioned near walls. Buy a long antenna that emits strong signals to a larger area. Check the router manual that came with your router for antenna replacement steps.

How To Install And Setup Linksys Wifi Range Extender

There are two methods to install, setup and accessing Linksys wifi extender.

METHOD-1

  • Associate the Linksys extender with a wall power outlet and switch it on.
  • Open your computer and click on the Wireless icon present in the bottom right corner of the taskbar.
  • Search for Linksys Extender Setup network and connect your computer to it.
  • After connecting successfully, click on the Browser icon to open it. You will be directed to the Setup page directly.
  • If the Setup page does not open, key in http://extender.linksys.com/ in the search bar.
  • Else, specify the IP address in the browser to open the required page.
  • Read the prompts displayed on the computer’s screen and follow them to set up the extender successfully.
  • In the proceeding step, select the network you want to connect to and enter the correct password.
  • Save the settings and wait until the rebooting process is over.
  • Plug in your extender within the fixed range and start using it.

METHOD-2

  • In the initial step, you have to connect the Linksys repeater to your PC.
  • You can make use of an Ethernet cable to associate them.
  • One end of the Ethernet cable needs to be associated with the computer’s port. The other end should be connected to the Ethernet port present on the extender.
  • Attach the Linksys wifi range extender to the power outlet using a power cord.
  • Wait patiently until all the blinking lights become stable.
  • Launch a web browser and enter the router’s IP address in the search bar.
  • Specify the Username and Password; go to Wireless Settings.
  • Key in the Network Name and Password and set the Radio option to Manual.
  • Enter the SSID and WPA key of the main router.
  • Restart the router and start using the Linksys extender to accessing Linksys wifi extender.

How To Boost Your Wifi Network Signal And Increase Range With DD-WRT

DD-WRT is a firmware that is based on Linux. It was mainly developed for wireless routers and access points. It was designed for the Linksys WRT54G series, but now even other models have started making use of it. DD-WRT offers more functionality compared to the original firmware provided by the manufacturer. Using DD-WRT, you can boost the signal of your Wi-Fi network and also increase its range. Make use of the below-mentioned solutions to increase the range of the signal.

METHOD-1

  • Launch the default browser on your computer.
  • Find the IP address of the router and enter it in the search bar.
  • Once you enter the configuration page of the router, choose the Wireless tab.
  • Select the Advanced Settings option. Find the TX Power option on that page.
  • The default value specified there is 70, but you can increase it to 100. This will improve the broadcasting power of the antenna.
  • Go to the Afterburner option. Before that, check if your router and adapter support speed boosting. If yes, enable Afterburner.
  • Else, search for the Bluetooth Coexistence Mode. Enable this mode to avoid interference between the wireless and Bluetooth device.

METHOD-2

  • Make use of a spare device as the repeater.
  • To do so, open the configuration page of the router on your browser.
  • Navigate to the Wireless tab and select the Basic Settings option.
  • Go to the Wireless Mode under Wireless Physical Interface.
  • Set the Wireless Mode to Repeater. Save your settings after modifying it.
  • This will elevate the range of your Wi-Fi signal. Still you need more solution for accessing Linksys wifi extender, make a connect with our tech helps.

Related Articles

Top