Why The Asus Router Blinking Power Light?

Usually, the Asus router blinking power light when the router’s firmware is corrupted. If you’re encountering this issue for the first time, then perform the quick solutions given below.

Solution 1: Restart your router

  • In most cases, restarting the router is enough to resolve the power light blinking issue. 
  • Disconnect the power cable from the router.
  • Leave the router disconnected from the power source for a few minutes.
  • Now, reconnect the cable to the router and turn it ON.
  • Check if the power light blinking issue is resolved.
  • If not, perform the next solution.

Solution 2: Run ASUS Rescue Mode utility

  • You can download the Asus Rescue Mode utility file from the official site of Asus.
  • On the official site, click Support > Driver & Tools > OS > Utilities > ASUS Rescue mode utility > Global. Locate the utility file and click Download beside it.
  • Once the utility tool has been downloaded, run the installer to install the utility on your computer.

Solution 3: Change your adapter settings

  • If the above solutions don’t resolve the Asus router blinking power light issue, change the router’s settings.
  • Firstly, connect the router to your computer using an Ethernet cable.
  • Now, open the Control Panel window on your Windows computer.
  • Click Network and Internet > Network Connection > Change adapter settings > LAN.
  • Right-click on the LAN option and select Properties followed by Internet protocol version4(TCP/IPv4).
  • Click Properties. Type the IP address and Subnet mask details correctly and click OK.

Solution 4: Upload firmware

  • First, download the firmware restoration file from the router’s support page.
  • Now, turn off your Asus router if it is turned ON.
  • Disconnect the power cable from the router.
  • Locate and hold down the Reset button for 5 seconds.
  • Following that, reconnect the power cable to the router while holding down the Reset button.
  • Now, go to your computer’s All Programs section and select ASUS Utility.
  • Choose the router name and click Firmware Restoration.
  • Click Upload. Select the downloaded firmware file from the list and click Upload.
  • Once the firmware upload process has been completed, check if the Asus router blinking power light issue is resolved. if not contact us.
Asus router blinking power light

Top