How To Configure Asus RT-AC68U Router Setup?

Asus RT-AC68U is a wireless, dual-band, gigabit router. It is both stylish and ultra-thin. This router has the capability to handle 300,000 sessions. It features the 2.4GHz and the 5GHz dual bands. Let's now look into the steps to perform Asus RT-AC68U router setup in detail.

Asus RT-AC68U Router Setup

Checking the package components:

  • The first step will be to open the router box.
  • The second step is to check if the following components are available in the router box:
  • The Asus RT-AC68U wireless router
  • Quick Start Guide
  • Support CD
  • Power adapter
  • The network cable (RJ-45)
  • After you have confirmed that all of the above components are present in the router box, you should focus on positioning the router in a proper place. Read the following section to find out how to position your router. This is the next stage in the Asus RT-AC68U setup.

Positioning the router:

For obtaining the best wireless signal transmission between your router and all the network devices that are connected to it, confirm that the following conditions are met:

  • Keep the router in a centralized area. This action ensures maximum wireless coverage for all your network devices.
  • Make sure that your router is away from 802.11g or 20MHz only Wi-Fi devices and 2.4GHz computer peripherals.
  • Always place the router at a good distance from Bluetooth devices, heavy-duty motors, transformers, cordless phones, refrigerators, and other similar equipment.
  • This precaution is essential to prevent signal interference.
  • Let the router be updated to its latest firmware. To obtain the latest firmware updates, you can visit the official Asus website.

You have now seen the initial steps in the Asus RT-AC68U router setup.

Other Setup Requirements:

You need a computer that meets the conditions given here:

  • Ethernet RJ-45 (LAN) port.
  • IEEE 802.11a/b/g/n/ac wireless capability.

If your computer does not possess built-in wireless capabilities, install an IEEE 802.11a/b/g/n/ac WLAN adapter on the computer for connecting it to the network.

  • An installed TCP/IP service.
  • Any standard web browser.

Steps to perform before the setup:

  • For avoiding setup issues, you should utilize a wired connection while setting up your wireless router.
  • Prior to setting up the router, ensure that you perform the following:
  • If you are planning to replace an already existing router, disconnect the same from your network.
  • From your existing modem setup, disconnect the wires. In case the modem contains a backup battery, remove that too.
  • Reboot your computer as well as your cable modem.
  • You have now seen the steps to be performed before the router setup.

Let's now plunge into the steps for both a wired and wireless connection to perform the setup.

Procedure for a Wired Connection:

For a wired connection, you can make use of a crossover cable or a straight-through cable. Now, follow the instructions given here to set up your router via a wired connection:

Task 1: Insert one end of the router's AC adapter into the DC-IN port. Next, plug the other end of this adapter into an electrical socket.

Task 2: Connect the computer to the router's LAN port by utilizing the bundled network cable. Confirm that the LAN LED is flashing.

    Task 3: You need to connect the modem to the WAN port of your router by making use of another network cable.

    Task 4: Insert one of the ends of the modem's AC adapter into the DC-IN port. Plug the other end of this adapter into an electrical socket.

You have now performed the Asus RT-AC68U setup using a wired connection.

Procedure for a Wireless Connection:

Perform the following instructions to set up your router via a wireless connection:

Task 1: Insert one end of the router's AC adapter into the DC-IN port. Plug the other end of this adapter into an electrical socket.

Task 2: Connect the modem to the router's WAN port by utilizing the bundled network cable.

    Task 3: Insert one of the ends of the modem's AC adapter into the DC-IN port. Plug the other end of this adapter into an electrical socket.

    Task 4: Install an IEEE 802.11 a/b/gn/ac WLAN adapter on the computer you are using and connect the computer to the router's Wi-Fi.

The hardware part of the setup is now over. The following section will help you log into your router and configure the desired settings.

Logging into the router's GUI:

Asus routers come with an intuitive web GUI. Via this GUI, you can quickly configure the various features of your router. For this purpose, you will need a standard web browser, like Google Chrome, Internet Explorer, etc.

Follow the steps given here to log into your Asus router's web GUI:

  • First, launch the default web browser on your computer.
  • Next, in the address bar of the browser, type 192.168.1.1. This is the default IP address of your Asus wireless router. You will now be directly taken to the login page of the router.
  • Enter the default Username and Password. It will be admin.
  • Now, you can start using the web GUI to configure the various settings of the router.
  • You have now completed the entire Asus RT-AC68U router setup.

Related Articles

Top