Asus RT-AC750GF router setup - It is a dual-band wireless router that is powered by MediaTek MT7620A and compatible with the latest IEEE 802.11a/b/g/n/ac standard. This router is excellent in providing maximum network coverage of up to 433 Mbps. The key features of this Asus router are listed below.
Supports Guest network
Security types: WEP, WPA, WPA2, and WPS
Protocols: IPv4 & IPv6
Chipset: MediaTek MT7620A @ 580 MHz
RAM: 64 MB
You can set up the Asus RT-AC750GF router over a wireless or wired network based on your desire. The below section explains both the methods in detail.
Before starting the router setup, unpack your router package and check whether the following components are provided along with the router.
Network cable (RJ-45)
Quick setup guide
Preparing for the setup
Make sure that your Asus RT-AC750GF router is unpacked.
Place your router close to your network modem.
Update your router firmware if available before starting the setup.
Make sure that your computer supports wireless or wired connectivity.
System requirements for the setup
A computer that has the TCP/IP service installed
Wireless capability: IEEE 802.11 a/b/g/n/ac
Browser: Internet Explorer, Mozilla Firefox, Safari, or Google Chrome
Steps for the Asus RT-AC750GF Setup
Physical setup -- Wired connection:
If you wish to set up your Asus RT-AC750GF router over a wired connection, then follow the below instructions.
Get an Ethernet cable and use it to connect your Asus router to your computer.
Make sure to connect the cable to the LAN port of your router.
Similarly, using another Ethernet cable, connect your modem to the router.
This time, plug the cable into the WAN port of your router.
Now, turn on your modem followed by the router.
Check whether the power, LAN, and WAN LEDs of your router are blinking.
Physical setup -- Wireless connection:
Connect your Asus router to the power source.
Using an Ethernet cable, connect your router to the modem.
Turn on your modem first and then the router.
Make sure that the necessary LEDs are blinking on your router.
Turn on your computer and connect it to your router's wireless network using the default SSID and password.
Congratulations! You have successfully completed the Asus RT-AC750GF router's physical setup.
Configuring the router settings:
Open a browser on the computer that is connected to your router.
Go to the router's web GUI using its IP address. The default IP address is present on the router label.
Use the default credentials to sign in to the router's configuration page.
Once you reach the router's GUI, the router will try to detect your Internet connection type, and based on this, the corresponding page will appear on the screen.
Type the connection details and click Save.
Similarly, configure your Asus router settings by following the on-screen instructions.
Once the configuration is complete, try to connect your computer or mobile phone to the Asus router's network.
To get remote assistance in performing the Asus RT-AC750GF router setup, contact our technical experts by clicking on the Call us button provided on this page.