Belkin N300 Router Setup Without Cd

Belkin N300 router helps you to experience high-speed internet that ranges up to 300 Mbps. You can connect four computers to this router at the same time. MultiBeam Technology, Speed, Easy Setup, 4 Ethernet LAN Ports, Preset security, and 2-year limited warranty are the highlights of this router. Anyone can set up this router easily and quickly with or without a setup CD.

Learn how to perform Belkin N300 Router Setup Without CD in the below section.

You can set up your Belkin router without using setup CD via router’s built-in web-based setup page

The overall set up process of this router takes place in three stages. They are as follows:

Verify your internet connection

Connect the Belkin router and your computer together

Perform the web-based setup process

Steps to verify your internet connection

This step is to make sure that you are using a stable internet connection for the setup process.
To verify the internet connection, connect your computer or hand-held device to it.
Now, access a website on your device.
If the internet connection is good and stable, you can continue the next of the Belkin N300 Router Setup Without Cd process.
If not, contact your ISP to solve this issue.

Procedure to connect the Belkin N300 router and your computer together

After completing the first step successfully, start this process as instructed below.

Get an Ethernet cable and use it to connect the modem to the WAN port of the Belkin N300 router.
Now, connect your modem and the Belkin router to the wall outlet.
Note: Don’t turn on the router now.
Connect your computer to the Belkin router using another Ethernet cable.
Now, turn on your Belkin router, modem, and the computer.
Wait until the router’s power light becomes solid blue.
If the power light of your router keeps blinking in blue, then check the connectivity.
Make sure that the Belkin router’s power and Ethernet cables are connected securely.
Now, you have completed the connectivity process between two devices.

Instructions to access your Belkin router’s web-based setup page

First of all, identify your Belkin router’s IP address.
Note: You can find your router’s IP address on its label.
Now, open a web browser on your computer.
Type the IP address of your Belkin N300 router in the search field.
If prompted, enter your Belkin router credentials in the given fields.
After signing in to your Belkin router’s web access page, locate and click the Let’s connect to the Internet option.
Now, you will be directed to the Let’s connect to the Internet page.
On this page, locate and click the Detect my connection option.
Finish the remaining steps of the setup process by following the instructions displayed on the screen.

If you aren’t able to perform Belkin N300 Router Setup Without Cd, contact our technical support team.