Belkin N450 DB F9K1105 is a wireless Dual-Band N+ router that broadcasts Wi-Fi via 2.4GHz & 5GHz bands. If you are the first time to perform Belkin N450 DB F9K1105 setup, follow the quick steps given below.
First, unpack your router and find a better place to place it.
Make sure to keep your router in a place where there is no Wi-Fi interference.
If your DSL modem is turned on, unplug its power cord from the electrical outlet to turn it off.
Next, connect your router to your modem using the cable attached toyour router.
Turn on the modem by connecting its power cord to an electrical outlet.
Also, connect your router’s power adapter to a wall outlet andturn it on.
Using the supplied network cable (Ethernet), connect your router’s LAN port and computer’s Ethernet port.
Next, insert the supplied CD-ROM into yourcomputer’s CD/DVD drive to run the setup program.
Make sure to identify the username and password ofyour internet connection.
On the CD menu, click the Setupicon and follow the on-screen prompts to personalize your router.
Once you have completed the router setup, the Belkin Router Managerappears on the system tray.
If your computer doesn’t support the router’s CD-ROM, manually set up the router using the WPS Push Button
Start the WPS Push Button Connectionon your computer or any other wireless device.
Within two minutes, navigate to your router, press and hold down the WPSbutton until the Wi-Fi light blinks blue.
To configure the Internet connection settings, access the router’s settings page using the router’s IP address and login details.
After configuring the required settings, click the Savebutton to save the settings.
Now, you would have completed the Belkin N450 DB F9K1105 setup successfully.