Usually, you would know that the router's lights indicate the power and the connection status of the router. When it comes to a Belkin router, there are usually 3 or 4 colors that indicate the router status. The easiest mode of connection to any computer or laptop is using the wireless interface or using the WPS button. Get the instructions to resolve the Belkin router blinking amber issue on your router.
Now, let us see the router LED colors and their status below.
Blinking colors Blue/Green/White - The router is starting or booting up.
Solid colors Blue/Green/White - The router is connected to the internet.
Blinking Amber/Orange - The router cannot connect to the modem. The modem is either off or not connected to the router.
However, since we are dealing with the Amber light blinking issue, we shall brief you on how to set up the Belkin router to the modem properly, so that you will not be having the blinking Amber light issue on the router.
Initially, turn off your modem and remove the power cord.
Similarly, turn off your router and disconnect the power cord.
Unplug the Ethernet cable from the router and the modem.
After few minutes, turn on the modem and wait till it becomes ready to resolve Belkin router blinking amber issue.
Following that turn on your Belkin router.
Make sure there are no damages in the Ethernet cable.
Insert the Ethernet cable to the modem and connect the other end to the router.
Take another Ethernet cable, connect one of its end to the router, and insert the other end to your computer or laptop.
Now turn on the computer and open the default browser.
You will now have to enter the router IP address in the address bar and press the Enter button.
Check if you are able to log in to the Belkin router page.
If you are able to log in to the router page, you will no longer face the Belkin router blinking amber issue on your router.
Following the above-mentioned steps will resolve the Belkin router blinking amber on your router.