Steps For Belkin Router Manual Setup

If you are setting up a Belkin router for the first time, consider the steps that are given below for Belkin router manual setup.

You have to connect your modem and the Belkin router using a network cable for Belkin router manual setup.

Plug in an Ethernet cable to the modem and connect the other end of the cable to your router's WAN port.

Make sure to connect your modem and router to power outlets.

Insert the Belkin router setup disc that came with the package into the CD drive of your computer.

When the installation wizard appears, click Run the Easy Install Wizard.

Continue with the instructions on the screen to create a network username and password.

If you don't have the installation disc, you can go with the manual setup method.

Once you have connected your modem and router using an Ethernet cable, connect the router and computer using another Ethernet cable.

For this, connect the Ethernet cable to the LAN port of your router and plug in the other end to your computer.

Press the Windows and R buttons together to open the Run dialog box.
Type cmd in the search section and tap Enter.
Enter ipconfig in the Command Prompt window and hit the Enter key.
Find the Belkin router's IP address in the Default Gateway section.
The Belkin router's default IP address is 192.168.2.1. Enter the IP address your browser's address bar.
Click on the Login button and leave the password section blank. Click Submit.
Go to the Internet WAN section and select Connection type as Dynamic.
You can set the SSID and password of the network to connect wirelessly.
After making the required settings, click on the Apply Changes option.
You can now get connected to your network from any device using the network SSID and password. and complete your Belkin router manual setup.