How To Fix Belkin Router N150 Orange Light?

 Belkin Router N150 Orange Light

Each blinking or solid light on the router’s control panel has a meaning. On this page, we’ll see the causes for the Belkin router N150 orange light.

If you see the router’s LED blinking in orange, it indicates anyone of the following:

  • No Internet Connection.
  • A problem in physical connection.
  • Router hardware failure.
  • A problem in the router’s firmware.

To fix the orange light blinking issue on your Belkin router, perform the simple troubleshooting instructions given below.

  • First, check if your modem is connected to the router.
  • If not, connect it using a network cable. Make sure not to use a damaged cable for the connection.
  • Now, reboot your Belkin router, modem, and the computer.
  • To reboot the router, turn off the router first. Disconnect the power and the network cables from your router.
  • After rebooting all your devices, wait for 1 minute.
  • Now, check the light status on your Belkin router. If it is blue, then it means your router is connected to the Internet successfully.
  • If not, connect your modem directly to the computer. If you are not able to access the Internet, contact your ISP to resolve this issue.
  • Check if your router’s firmware is up-to-date.
  • If not, install the most recent version of the router’s firmware on your computer, and then check the blinking orange light is resolved or not.
  • If the Belkin router N150 orange light issue persists, restore your router to the factory defaults.
  • To do it, hold down the Reset on your router for 10 seconds.
  • After 10 seconds, release the button.
  • Now, you can see the light on the router’s control panel blinking.
  • Now the light should glow solid.

Related Articles

Top