Belkin Router will not Connect to Internet

Belkin router will Not connect to internet

Sometime, you may face internet connection issues while connected to your Belkin router. Resolve this Belkin router will not connect to internet problem by performing the troubleshooting steps as given below.

  • Disconnect both your modem and the Belkin router from their power sources.
  • Reconnect the modem’s power cord to the power source.
  • Plug the Belkin router’s power cord into the power outlet.
  • Disconnect the router from your computer and then reestablish the connection.
  • Open a web browser and check if you have access to the internet.
  • If the connection between the computer and the Belkin router is wired, the network or Ethernet cable might be damaged.
  • Replace the damaged cable with a new one and now check the Belkin router will not connect to internet issue.
  • If the connection between them is wireless, the following factors might be the reason for this problem.
  • Incorrect network selection and security
  • Incorrect client TCP/IP settings
  • Poor signal strength
  • Sources of interference
  • Use the correct wireless information to connect the Belkin router’s wireless network.
  • Make sure the wireless adaptor on the computer is turned.
  • The firewall or antivirus program on the computer might block the Internet. In this case, disable the firewall.

Windows 10

  • On your Windows 10 computer, right-click the Start icon and choose the Control Panel option to solve this Belkin router will not connect to internet issue.
  • Choose the Small Icons option from the View By drop-down menu and select the Windows Firewall option.
  • Click the Turn Windows Firewall on or off link on the left panel.
  • This will open the ‘Customize settings for each type of network’ window on the screen.
  • Select the radio button next to the Turn Off Windows option in both the Private Network Settings and Public Network Settings sections.
  • Save the settings by clicking the OK button.
  • If the issue persists, update the Belkin router’s firmware to the most recent version.

Firmware update

  • Download the most recent version of the Belkin router’s firmware from the official router manufacturer website.
  • Now, open the default web browser on the computer and access the web-based management page of the router using the IP address, username, and password.
  • Navigate to the Utilities section and select the Firmware Update option.
  • Click Browse and choose the downloaded router firmware file.
  • Click Update -> OK -> OK.
  • After finishing the firmware update process, select the OK option.
  • Now, the Belkin router will not connect to internet issue is resolved.

Related Articles

Top