Steps For Connecting Netgear Router To AT&T Modem

It is not difficult to connecting Netgear router to AT&T modem if you follow the quick steps given on our site. The AT&T modem provides a DSL home network and mobile wireless service.

Before Connecting The Netgear Router To The AT&T Modem:

  • On your windows computer, open the default browser and access the AT&T modem's interface with the help of your ISP's modem credentials.
  • Click on PPP Locationin the Advanced section to access the advanced modem settings.
  • Select the Bridge Modeoption to set the AT&T modem in Bridge mode and forward the Internet connection to the Netgear router.
Connecting Netgear Router To AT&T Modem

Connecting The Netgear Router To The AT&T Modem:

  • Take a standard Ethernetcable and connect an end to the Netgear router's WAN
  • Connect the other end of the Ethernet cable to the AT&T modem.
  • Take another Ethernet cable and plug one of the endsinto the LAN port of the router.
  • Connect the other end into the network port of yourWindows computer.
  • Connect the Netgear router to an electrical outlet with the help of the supplied power cord and power up the router.
  • Make sure that the AT&T modem is turned on to connecting Netgear router to AT&T Modem.
  • Power up the Windows computer and check whether you are connected to the internet.
  • You can also connect the computer wirelessly to the router if you knowthe Wi-Fi network credentials and also if your computer has the Wi-Fi capability.
  • Next, open the default browser on your computer and enter the Netgear router's IP address in the URL
  • It will open theNetgear login portal.
  • You can identify the router's IP address onthe label attached to the backside of the Netgear router.
  • Otherwise, click the Startmenu and type 'cmd' in the search panel.
  • From the search result, give a right-click on theCommand Prompt app and select Run as administrator.
  • When the Command Prompt window pop-ups, type 'ipconfig' and press the Enter 
  • Navigate to the Default Gateway section and note down the router's IP address.
  • In the router's login portal, enter 'admin' in the Username field and 'password' in the Password field to access the router's administrative interface.
  • Click the Advancedtab and select Advanced Setup from the left-side panel.
  • Select IPv6and go to the right-side panel.
  • Select the PPPoEoption from the Internet Connection Type
  • Click the Savebutton and verify if the connection has been established. Finally you are successfully connecting Netgear router to AT&T Modem.

Related Articles

Top