Easy Steps: D-Link Shareport Go Dir-506l Router Setup & Configure

D-Link Shareport Go Dir-506l Router Setup - Complete Guide

The D-Link SharePort Go DIR-506L router setup offers wireless speed of up to 150 Mbps. Using this router, people can involve in real-time online activities. Such activities include online gaming, video streaming, and real-time audio.

The main features that come with this router are as follows:

Fast wireless networking

Full compatibility with IEEE 802.11g standards

Advanced firewall features

On this page, we shall look into the D-Link router setup process in detail.

Stage 1 - Checking the components:

As soon as you open the router package, make sure that the following components are available inside:
The D-Link SharePort Go DIR-506L router
The setup CD

USB cable
A rechargeable battery
The Quick Install guide

Stage 2 - Checking the system requirements:

Before you start setting up the router, confirm that the following network and web-based configuration utility requirements are met:

Network requirements:

Ethernet-based DSL or cable modem
IEEE 802.11n or 802.11g wireless clients

Ethernet (10/100)

Now, continue reading to find out the rest of the requirements for the D-Link SharePort Go DIR-506L router setup.

How to perform the router setup? – An Overview:

The D-Link SharePort Go DIR-506L router will connect to your DSL or cable modem and share the Internet connection wirelessly with all the other devices. Using this router, you can get Internet access for your home or an entire office. If you make use of the SharePort mobile feature, you can conveniently share files and other resources with the computers and similar devices connected to your wireless network. Now, we shall discuss the steps involved in the D-Link SharePort Go DIR-506L router setup.

Installing the D-Link SharePort Go DIR-506L router:

The first step will be to slide off the cover from the router. Then, you have to insert the battery into the router.
After you have inserted the battery, you can close the battery slot with the cover.
Take the USB cable (that came along with the router package) and connect one of its ends to the router. Connect the cable’s other end to the USB port on your computer to charge the router.

Utilize the details given here to connect wirelessly to the router:
The Default SSID (Network Name): DIR506L-##### (Here, the #### indicates the last four digits of the MAC address. You can find this address on the label located in the router’s battery compartment).
The Default Password: 0266000123#

Now, continue with the steps to perform the D-Link router setup.

On your computer, open the default web browser and navigate to the router’s setup page (https://dlinkrouter.local).
On the login page, you have to fill in the User Name and Password fields.
The default User Name is admin.
Leave the Password field blank.
Once you have logged into the router, you will find the Setup Wizard on your screen. Since this is the first time you are using your DIR-506L router, the Setup Wizard will open up automatically on your computer. In case the wizard does not open automatically, click on the Internet Connection Setup Wizard button.
Choose the desired operating mode and then click on the Next button.
You can now follow the instructions given below to continue with the D-Link SharePort Go DIR-506L router setup.
For Router Mode:
Choose the type of Internet connection you wish to use:

DHCP
PPPoE
Static IP
For Wi-Fi Hotspot Mode:
Choose the desired hotspot to which you want to connect.
At the bottom of the screen, you can see the Select button. Click on it.
If required, type the password on the next screen.
For 3G/4G Mode:
If you have a PIN code for your SIM card, enter the same.
Click on the Next button.
For Repeater Mode:
Choose the wireless network that you wish to extend.
Click on the Select button at the bottom of the screen.
On the next screen, enter the password, if necessary.

Continue reading for the rest of the steps in the D-Link router setup.

Type in a name for your new wireless network.
Click on the Next button.
Confirm all your settings and then click on the Save button.

Reboot the DIR-506L router.
Once the router reboots, you might have to reconnect to it by utilizing the new wireless Network Name (SSID) and Password you have created.

You have now successfully finished the D-Link SharePort Go DIR-506L router setup.