How To Connect Linksys Extender To The Router?

How To Connect Linksys Extender To The Router

Linksys Extender is a device that helps you to extend your network connection by repeating the wireless signal of your router. You can configure this extender with any router over a wired or wireless connection. This section will help you learn how to Connect Linksys Extender To The Router. Before you begin, make a note of your wireless router’s network name, password, and channel. Also, it is better to reset the extender before setting it up.

Procedure to reset the Linksys extender:

  • Locate the Reset button located at the top of the Linksys extender.
  • Now, hold down the Reset button for at least 5 seconds or until the LED lights on the extender start blinking.
  • Once the reset process is completed, your Linksys extender will be ready to be configured with a router.

Basic hardware setup:

  • First of all, place the Wi-Fi router, Linksys extender, and your computer within a short-range.
  • Make sure that the extender and your computer are turned OFF.
  • Now, using an Ethernet cable, connect your Linksys extender to the computer.
  • Plug the extender to the electrical outlet and turn it ON.
  • Turn on your computer and the router.
  • Connect your computer to the router’s network.

Connect the Linksys extender to a router:

  • Now, open a web browser on your desktop or laptop.
  • In the web browser’s search field, type the IP address of your Linksys extender.
  • Now, a pop-up dialog box prompting you to enter your router’s credentials will appear on the screen.
  • In the given fields, enter the router’s credentials and click the Log In button.
  • Now, your router’s web access page will open.
  • Click the Wireless tab followed by Basic Wireless Settings.
  • Select the Manual option by clicking the radio button beside it.
  • In the Network Name (SSID) text field, enter your router’s name.
  • Now, select the security type WPA2/WPA Mixed Mode or WPA Personal or WPA2 Personal from the Security Mode drop-down menu.
  • Enter your router’s password in the text field titled Passphrase.
  • Click the Save Settings button.
  • Now, disconnect your Wi-Fi router and the Linksys extender from the power source.
  • Wait for at least 30 seconds.
  • Reconnect the router and your extender to the power outlet and turn them ON.
  • Wait for sometimes until the extender to syncs with your router.
  • You can contact our technical experts if you have no idea on how to Connect Linksys Extender To The Router

Related Articles

Top