How To Connect Netgear Extender To Verizon Router?

How To Connect Netgear Extender To Verizon Router

The step-by-step guidelines to know how to connect a Netgear extender to a Verizon router are provided on our web page.

  • First, connect the Netgear extender to a power outlet.
  • Check if your Verizon router supports WPS.

Connecting the Netgear extender to the Verizon router using the WPS button:

  • The WPS button is located either at the front or rear side of the Verizon router.
  • Press the WPS button on the Netgear extender and then hold the WPS button on the Verizon router and know how to connect a Netgear extender to a Verizon router.
  • The WPS LED on the Netgear extender stays green. This indicates that the connection establishment between the Netgear extender and the Verizon router is successful.
  • Once the setup is over, unplug the Netgear extender and place where the Wi-Fi signal is low by connecting it to a nearby electrical outlet.
  • Check if the Link LED on the Netgear extender turns green. This ensures that the Netgear extender receives a good signal from the Verizon router.
  • If the Link LED turns red or amber, you have to change the place of the Netgear extender nearer to the Verizon router.
  • Go to the computer and use the same network name (SSID) and password of the Verizon router to connect the computer to a wireless network.
  • If needed, you can change the network name and network key.
  • Check if the Client LED on the Netgear extender turns green. This indicates that your computer or client device is getting a good Wi-Fi signal.
  • If the Client LED is either red or amber, the Wi-Fi signal is not extended to that area.
  • If the client device is not getting Wi-Fi signal or the Client LED on the Netgear extender turns red, try to move the client device nearer to the Netgear extender and finally you will know how to connect a Netgear extender to a Verizon router.

Related Articles

Top