How To Disable Firewall In DLink Router 2730U

D-link routers have an inbuilt firewall to protect the network. These firewall software guards your devices' data against attacks. The SPI feature of the router effectively blocks cyber attacks. To disable the firewall in DLink router 2730U, ensure that the system and router are secured and can be safe without a firewall. You may receive lots of messages on your computer while you are on the Internet. If you want to receive a different connection, for example, IPv6, you need to deactivate the firewall. At times for playing certain games, the router firewall has to be disabled. The step-by-step instructions for how to disable firewall in DLink router 2730u is given below.

Steps For How To Disable The Firewall In D-Link Router 2730u

  • Get the IP address of your D-Link router.
  • The default IP address of D-link routers is 192.168.1.1.
  • Type the IP address in the search field of your browser.
  • Click the Advanced option.
  • Select the Firewall Settings option displayed on the top-left corner of the page.
  • If the Enable SPI box is checked, uncheck it.
  • You need to disable NAT so that all the traffic can pass through the router.
  • Click the Endpoint Independent option for both UDP and TCP Endpoint Filtering.
  • Disable the anti-spoof checking feature.
  • Click the Save Settings option and then reboot the router.
how to disable firewall in dlink router 2730u

Disable The Router Firewall In Windows And Mac Computer

The IP address of your router is usually printed on the label attached to the router. This IP address is required to open the web management page of your router. You can also get the IP address of your router from your computer connected to the DLink router and find more solution for how to disable firewall in DLink router 2730u.

Getting The Router's IP Address (Windows)

  • Click the Start menu on your Windows computer. If you have the Windows 1 OS, click the Windows icon.
  • Type cmd in the search box.
  • When the Command Prompt icon appears, right-click it.
  • Select the Run as administrator option.
  • On the User Account Control dialog box, select the Continue tab.
  • Click the Yes option when prompted.
  • The Command Prompt window displays. Type “oipconfig /all” on the screen and press the Enter tab.
  • The config command will run and the addresses of all the connected networks will be displayed on the screen.
  • Locate “Default Gateway” under Wireless LAN Adapter Wi-Fi. Note the number displayed against the gateway. This is the required IP address.

Getting The Router's IP Address (Mac)

  • Click the Apple icon and select System Preferences.
  • The System Preferences window opens. Find the Network icon and select it.
  • Click the Advanced tab on the next screen that opens.
  • Select the TCP/IP tab. The IP address of the router will be displayed against the Router option.
  • Note down the IP address correctly as displayed on the screen.

Disabling Your Router's Firewall

  • For how to disable firewall in DLink router 2730u, Open a browser on your computer connected to the D-Link router.
  • Type the D-Link router's IP address in the search field.
  • The IP address for Dlink routers is 192.168.1.1 by default.
  • Tap the Enter option. The Login screen of the router displays on the browser.
  • You will be provided with a default administrator username and password. Enter the administrator username and password.
  • If you have not made any changes to username or password, type ‘admin’ in the username field and leave the password field empty.
  • If you are unable to open the configuration page, try using ‘admin’ as the password.
  • Click the Advanced Configuration tab. The option varies depending on your router model.
disable router firewall

  • Locate the Firewall option on the screen that opens. The firewall will be enabled by default.
  • Deselect the Enable the default firewall option. The router’s firewall will be disabled.
  • If prompted, select the OK option. You can change the firewall settings anytime.

FAQ

How Do I Get To My Router Settings ?

  • Note down the router’s IP address.
  • If you don't know the IP address, check the router’s label.
  • In case the label is not present, you can find the IP address from the network configuration settings of the computer connected to the router.
  • If you have a Windows computer, run the configuration command prompt to get the IP address of the router.
  • On Mac, you can get the IP address from the Network menu under the System Preferences window.
  • Now, open an internet browser and enter the IP address of the router in the address bar.
  • The login dialog box opens. Type 'admin' as the username and leave the password field blank.
  • Select the Manual Internet Connection Setup tab displayed at the bottom of the screen.
  • Make changes to the network settings as per your requirement.
  • Do not forget to save the changes that you have made to the settings. Get user manual from our tech experts for how to disable firewall in DLink router 2730u.

How Can I Locate A Hidden Wi-Fi Connection And Router IP Addresses ?

  • Keep ready the SSID of the hidden network.
  • Right-click the Networking icon on your desktop to open the Network and Sharing Center section.
  • Select the Setup a new connection or network option.
  • On the window that opens, select the Manually connect to a wireless network option.
  • Provide the SSID of the network and security passcode.
  • Check the box next to the Start this connection automatically option, so that you need not do this procedure every time you want to connect to the network.
  • You will be notified with a message after connecting to the network successfully.
  • To get the IP address of the router, click the Start option and then select the Run option.
  • Type CMD and hit Enter. On the Command Prompt screen, type ipconfig in the screen and then press the Enter key again.
  • Scroll down to the Wireless LAN adapter Wi-Fi 2 section. The IP address of the router is mentioned against the Default Gateway option.

How Can I Change My Router's Password Without Disabling Wi-Fi Firewall ?

  • Ensure that the router is turned on. Get a pointed tool and use it to press the Reset button. Hold the button for at least 1 seconds.
  • The settings of the router will be reverted to the factory defaults.
  • From the computer connected to the router, open a browser.
  • Enter the IP address of the router in the address field and hit the Enter key on your Keyboard. The default IP address of the router is 192.168.1.1.
  • When the login page appears, type admin in the username field. You can leave the password field empty.
  • If you have changed the administrator credentials, enter the username and password that you have created.
  • The router configuration page opens. Click the Wireless tab on the page.
  • Select the Wireless Security option. Enable the WPA2 Wireless Security mode.
  • Type the new password in the Pre-shared key section. Create a password that can be remembered easily, but at the same time not too easy for others to guess.
  • Type the password again in the Confirm Passphrase tab. Click the Save Settings tab to apply the changes.

I Can't Find The Firewall Option ?

  • If you have changed the administrator username/password and do not remember it anymore, then you cannot open the configuration page.
  • In such cases, you have to reset the router.
  • Press and hold the router’s reset button for at least 1 seconds. All the router settings will be restored to factory defaults.
  • You can now use the default administrator username and password to log in to the configuration page.
  • The procedure for accessing the firewall settings from the router configuration page is given below.
  • Open a browser from your computer connected to the router.
  • Type the 192.168.0.1 in the address bar and hit the Enter key on your keyboard.
  • Log in to the router configuration page by providing the necessary administrator credentials.
  • Click the Advanced tab.
  • The Firewall Settings option will be displayed on the left column of the page.
  • For D-Link routers, the Firewall setting comes enabled. If you want to disable it, uncheck the Enable SPI option. Deselect the Enable anti-spoof option as well and follow the above mentioned guide for how to disable firewall in DLink router 2730u.

Related Articles

Top