How To Hook Up Netgear Router?

If you have a NETGEAR router with a Smart Wizard user interface, configure the internet connection on it and know how to hook up Netgear router by following some simple steps:

Hook Up Netgear Wireless Router

  • Connect your Broadband modem to a LAN or DSL connection.
  • Turn on your NETGEAR router, modem, and computer and ensure that they are in the ready state.
  • If they are not in the ready state, wait until all the devices turn active.
  • Connect your broadband modem to the router using an Ethernet cord and then with another Ethernet cord, connect to Netgear router and computer.
  • Go to a web browser on your computer and type the IP address of your router in the address bar. (IP address is either http://192.168.0.1 or http://192.168.1.1)
  • When you have entered the IP address in the address bar correctly, press the Enter button to start searching.
  • You may have requested to log into the NETGEAR router page.
  • If you are using a new router, the default username is admin and the default security password is password.
  • The username and the security password are case-sensitive. Enter them properly to connect to the network.
  • If the above-said password is not working, you might have changed the router network name and password.
  • Remember the network name and password and enter when it prompts.
  • If you can not remember the password, then reset the router settings to default.
  • Reset the NETGEAR router settings to default and log in to your router access page.
  • When you can access the router settings, click the Setup Wizard option to view the Setup Wizard screen appear on the screen and continue with the next step of how to hook up Netgear router.
  • When the Setup Wizard screen displays, select Yes and then click Next.
  • Now the Setup Wizard starts to detect the type of network connection. For cable network connections, the Setup Wizard finds the Dynamic IP.
  • When the Dynamic IP Detected window appears on your computer screen, select the Next button. Now the router saves all the setting changes.
  • NOTE: Be sure not to change the default settings until your Internet Service Provider (ISP) gives you specific DNS information to configure on your router.
  • Check the status of the internet connection by opening the Router Status option under the Maintenance menu.
  • All the network configuration details display on a window. Look in the IP Address row and check whether you have a valid IP address.
  • Be sure not to leave the IP address field blank. (filled with zeroes like 0.0.0.0).
how to hook up netgear router

Configure NETGEAR Router With NETGEAR Genie For Internet Connection: 

Follow the below steps for how to hook up Netgear router and to configure DSL internet connection on a NETGEAR router which has the NETGEAR Genie user interface.

  
  • Use a DSL Microfilter to set up this connection. Plug one end from the phone line and the other end from the NETGEAR DSL modem router to the Microfilter.
  • Connect the DSL Microfilter to the DSL connection.
  • Use an Ethernet cord to connect to Netgear router to the CPU. Use a power cord to connect the DSL modem to an electrical wall outlet.
  • Turn on the router and computer. Wait until the devices wake up from the sleep state.
  • Open a web browser like Mozilla Firefox, Google Chrome, or any other browser.
  • When you open the web browser, a new tab will automatically load the NETGEAR genie setup screen. If the NETGEAR setup page does not open automatically, type http://www.routerlogin.net or http://192.168.0.1.
  • When configuring the internet connection page on your browser, select the Yes option and then click the Next option to continue.
  • Choose your country from the displayed drop-down menu when the Select Country window opens.
  • Now the Setup Wizard finds out the type of internet connection. Wait until the process completes.
  • You need to log in to connect the DSL connection to the internet which will be found as PPPoE/PPPoA.
  • If you know the Username and password, type it in the appropriate place and then click Next. If you are not aware of the login credentials, then contact the Internet Service Provider.
  • Now the router applies all the settings and connects to the internet. To check whether you are connected to the internet, click the Take me to Internet option.

Steps To Configure The NETGEAR Router On Genie User Interface:

To configure a cable internet connection on a NETGEAR router that uses the genie user interface, follow the below steps for how to hook up Netgear router:

  • Unplug the router power cord and the modem. Also, remove the back-up battery temporarily from your modem.
  • Link an Ethernet cable between the router internet port and the modem.
  • Connect the router and computer using an Ethernet cable.
  • Insert the battery back into the slot and then reconnect the modem. Wait until all the lights glow steadily.
  • Link the power cord to the router and turn it on. Hold until the router green light turns solid.
  • Open an internet browser like Google Chrome or Mozilla Firefox. Type the router’s IP address (IP address is either http://192.168.0.1 or http://192.168.1.1) on the address bar and start searching.
  • If you are not aware of the router IP address, then contact your Internet Service Provider When the router page is loaded, log in to the router settings.
  • Type the username and password as admin and password which are the default credentials.
  • Make sure the Caps lock is not enabled because the password is case-sensitive.
  • After logging in to the router page, click the Advanced option and then select the Setup Wizard.
  • Choose the Yes option and then click Next.
  • Now the NETGEAR Genie Setup Wizard finds out the internet connection type. This will take one or two minutes approximately to complete the process.
  • Once the internet setup completes, the configuration page displays on your computer screen. Click the Take me to the Internet option to examine the internet connection.

Access Your Remotely Using The NETGEAR Desktop Genie

Learn how to use NETGEAR Desktop genie to access your NETGEAR router remotely and how to hook up Netgear router settings in this article.

Requirements:

  • Wired or wireless computer or laptop.
  • An active internet connection.
  • An updated internet browser (Internet Explorer, Google Chrome, Mozilla Firefox)
  • The updated version of the NETGEAR Desktop Genie.
access your remotely using netgear router

Procedure To Access Remotely With NETGEAR Desktop Genie

  • Download the NETGEAR desktop genie on your remote computer and local computer.
  • Find the NETGEAR desktop genie software and open it on your local computer. The local computer is the one that is connected to the router.
  • Select the Router Settings option and then choose Remote Access to log in.
  • If found that it is automatically logged in, click on Logout to go back to the login screen.
  • Click the Sign Up option to create your Remote genie account.
  • Fill out the blank space and select the Create option.
  • Click the OK option after successfully creating your Remote genie account.
  • On the completion of account creation, a confirmation email message will be sent to you from the NETGEAR genie support team.
  • Open the email and tap the Confirm Email option to affirm that it is your email account.
  • Log in to the Remote Genie account which you created.
  • Click the OK option and then click the Register button to register the device.
  • Once the device is registered, click the Logout option.
  • Open the NETGEAR Desktop genie software on your remote computer.
  • Select the Router Settings option and log in to your Remote genie account.
  • Once you are logged in to the genie software, locate the cloud icon on the top-right corner of the Desktop genie window.The remote icon ensures that you are managing this router feature remotely.
  • Manage various options like Wireless Settings, Guest Access, Traffic meter, Reboot options, and Parental Control.
  • Just select the tabs to edit various options. Some other options will be found in future updates.
  • After changing all the required settings, click Logout to exit from the Remote Access page.
  • You may lose access to the remote connection when you select the Unregister option.
  • You have to use the local computer again and access the Desktop genie software.
  • To regain access, log in to the Cloud Access Account and click the Register button.

How To Connect The NETGEAR Router With A Wireless Device?

To connect a wireless laptop, tablet, or smartphone to the NETGEAR wireless router, follow the below steps for how to hook up Netgear router:

  • Connect your modem to a power point and turn it active.
  • Plug one end of the Ethernet cable into the available Ethernet port on your modem and connect another end to the WLAN port that provides internet connection.
  • Connect the NETGEAR router to the power supply through a power adapter.
  • Connect the modem and your NETGEAR router using another Ethernet cable with the modem.
  • Turn on the NETGEAR router and wait until the LED light becomes stable.
  • Know your NETGEAR preset wireless settings that are printed at the bottom or back of your router.
  • Turn on the wireless device and click the Wireless symbol or any related options.
  • Locate the NETGEAR router wireless network name or SSID on the Wireless connection manager.
  • Click on the Network name or SSID and enter the security passphrase.
  • Click OK to save your network and connect to Netgear router.
  • Open a web browser like Safari, Mozilla Firefox, Microsoft Edge, or Google Chrome on your wireless device.
  • Enter http://www.routerlogin.com or http://www.routerlogin.net on the address bar and click the search icon.
  • Log in to your default NETGEAR genie account.
  • Read and comply with the instructions provided on the wireless device screen to complete the device configuration and finish the process of how to hook up Netgear router.
netgear wireless device connect

Related Articles

Top