How To Install Netgear Nighthawk AC1750?

Netgear Nighthawk AC1750 is a smart Wi-Fi router. It is also a dual-band router, which means it has the ability to transmit both on the 2.4 GHz and the 5 GHz wireless bands. The following instructions will let you know how to install Netgear Nighthawk AC1750 router.

Confirm That You Have An Active Internet Connection

The first step is to remove the antenna caps from your Nighthawk router’s antenna posts.

The next step is to attach your antennas. To do this task, follow these instructions:

After you align your antennas with your router’s antenna posts, you have to attach the antennas to the threaded antenna posts.

You then have to position your antennas for the optimum Wi-Fi performance.

Netgear always recommends that you place the middle antenna vertically. The outer ones need to be placed at an angle of 45 degrees.

After attaching the antenna, you need to prepare the modem.

Disconnect the modem from the power source.

Take out the modem’s batteries (in case it has a battery backup).

NOTE: In case your modem has been connected to another router, disconnect the cable between the modem and the other router.

Confirm that the modem is turned off. It should be connected only to your wall jack (for your Internet). Readout the steps below to get an idea about how to install Netgear Nighthawk AC1750 router.

Idea Regarding The Installation Of Netgear Nighthawk AC1750

The next main task is to connect the modem to the Nighthawk router. The following are the simple instructions to do the same:
First, plug the modem back into the electrical outlet.
Next, turn on the modem.
Replace its batteries (if your modem had a battery backup and you removed those batteries earlier).
Your router must have come packed with a yellow Ethernet cable. Use this cable to connect your modem and router. Connect the yellow Ethernet cable between the modem and the yellow Internet port on the router.

Now, you need to power on your Nighthawk router.
Get hold of the power adapter and connect it to the router. Then, plug the power adapter into the electrical outlet.
Wait for your Power LED on the front panel to get lighted up in amber and then turn white. If you find that none of the LEDs are lit, you need to turn your attention to the rear panel of the router. Here, press the Power On/Off button. Now procced with the steps below to install Netgear Nighthawk AC1750 router.

Steps To Install

It is now time to connect your computer to the Nighthawk router. You can do it using a wired or wireless connection.
If you are opting for a wired connection, get hold of an Ethernet cable and connect it between the computer and the router’s Ethernet port.
If you are going for a wireless connection, you can make use of the Wi-Fi settings on your product label.
The very next task at hand will be to open the genie screen on your computer.
Open the default browser on your computer.
Since this is the very first time you are connecting to the Nighthawk router, you will find that a genie screen gets displayed.
Simply follow the instructions on the genie screen to get connected to the Internet.
If the genie screen does not appear, try the steps given here:

Close your web browser and reopen it.
Confirm that your computer and router are connected properly.
Ensure that the router is powered on and the Power LED is lit up.
Even after executing the above steps, you don’t see the genie screen, you have to log into your Nighthawk router. This action will ensure that the Netgear genie detects the Internet connection. To log into your router, use the following steps:
Open the web browser on your computer.
Navigate to the login screen of the router using its IP address.
Type in the default Username and Password to log in. The default Username will be admin and the default Password will be password.
The BASIC Home screen will now appear. The genie will automatically detect your Internet connection.

You have now install Netgear Nighthawk AC1750 router successfully.