How To Make Your DLink Router Private

If you are connecting the wireless enabled device to a network, it is necessary to secure it with the following procedure of how to make your DLink router private. You need to change the admin credentials periodically. Make a note that the router broadcast signals in all directions. Check if the firewall settings of the router are enabled (Disable Firewall In DLink Router). If you are unable to connect the router to the network, the settings may block the connection. Try to hide the network name or SSID from the surrounding networks. Go through the steps mentioned below for accessing the router privately.

how to make your dlink router private

How Do I Make My DLink Router Private

  • Access the settings of the router.
  • Provide ipconfig in the search tab of the Windows system.
  • If you are using a Mac system, click System Preferences -> Network.
  • Select the Advanced option available at the bottom of the screen.
  • Click the TCP/IP option on the top of the next window.
  • Refer to the router’s IP address. Touch Settings -> Wi-Fi.
  • Download the firmware from the manufacturer’s website.
  • After downloading, launch the setup file on the system.
  • Install the firmware on the system using the instructions on the screen.
  • Make use of the WPA2 key to secure the wireless network.

How To Make My DLink Wireless Router Secure

  • Locate the Web browser on your system.
  • If the system does not contain a browser, install a compatible one.
  • After installing,type the IP address of the router (192.168.0.1) in the search field.
  • Wait for the D-Link router’s setup page to display.
  • Provide admin as the username and leave the password field blank.
  • Choose the Wireless Settings tab and then select the drop-down arrow adjacent to the Security Mode.
  • Click the Security mode option that you wish to apply to the router.
  • Provide a passphrase in the field. Click the Save option to make the changes with above mentioned procedure of how to make your DLink router private and secure Dlink router.

How To Hide Your Router's SSID

  • The network name of the router is referred to as SSID.
  • Find the network name in the list of available networks.
  • It displays in the notification area of the system.
  • Enhance the security level of the router by hiding the SSID.
  • If you are unable to view the network name, it is referred to as the hidden one.
  • To connect the wireless enabled device to a network, make use of network name and password .
  • Move to the steps below to hide the network name.
  • Access the web browser on your system and key in the IP address of the router in the URL tab.
  • Refrain from proceeding until the login prompt displays on the screen.
  • Provide the username as admin and keep the password field blank.
  • Select the Setup tab in the top of the navigation menu.
  • Choose the Wireless Settings option from the list of available menus.
  • Select the Enable Hidden Wireless option to hide the SSID.
  • Click the Save Settings option and close the browser.
  • If you are unable to view the router’s name on the list, then the settings are working correctly.
  • The instructions may vary based on the router model and brand.
  • You can view a Hidden network hotspot on your network list. Those above mentioned methods are the way to hide your router's SSID and how to make your DLink router private.

How Do I Secure The Wireless Signal Of My DIR Series Router

  • Launch the web browser on your system and provide the IP address of the router in the address bar.
  • Press the Enter key on your keyboard.
  • Select the Setup tab and choose the Wireless Settings option on the left panel of the page.
  • Choose the WPS-Personal encryption from the Wireless Security Mode menu.
  • This mode helps to improve security and compatibility.
  • The password is used for clients who require high-end security.
  • Specific gaming devices use the WPA mode.
  • Type the desired Pre-Shared Key in the respective box.
  • This password will secure the router’s connection.
  • Ensure that the password contains at least eight characters.
  • The character should be alphabets, numbers, and alphanumeric characters.
  • After making changes to the password, select the Save settings option to save the changes.

Private Internet Access On DLink Router Get a VPN ?

  • Turn on your system and router.
  • Right-click on the network icon at the bottom of the screen.
  • Select the Open Network and Sharing Center option.
  • Find the Set up a New connection or Network option on the screen and click on it.
  • Choose the Connect to a workplace option from the Connection tab.
  • Click the Use my Internet Connection (VPN) option.
  • Input the IP address of the Server when the system prompts.
  • Provide the username and password to connect the router to the VPN.
  • If you view the connection is ready to use option, select the Close icon.
  • Navigate to the Network and Sharing Center tab and select the Change adapter Settings option.
  • Right-click on the VPN connection icon and select Properties.
  • View the Security tab on the Properties screen.
  • Input the credentials on the Connect VPN connection window.
  • Check if the connection status shows Connected. Get more related solution for how to make your DLink router private, from our leading techies.

Related Articles

Top