How To Restart Netgear Router

Netgear router can at times face problems like connectivity issues, cable issues, network or signal issues. These errors have to be resolved immediately. One of the ways to set things right with the Netgear router is to perform a simple restart. In most cases, restarting the router will fix the problem in no time. This webpage gives you simple guidelines on how to restart Netgear router different models in a few minutes.

Netgear Router Restart Command

As discussed earlier, the problems that arise with the Netgear router can be resolved if you restart the router. There are many methods to restart them. One among them is the Command prompt method. With the help of the command window, you can rectify the issues that arise.

How To Restart Netgear Router

Follow the below-given steps to reboot the Netgear router with the help of the web interface.

  • Turn on your computer and open a web browser of your choice.
  • The web browser should be opened on the device that is connected to the router.
  • In the search bar, type http://www.routerlogin.com or http://www.routerlogin.net.
  • A prompt appears to enter the credentials.
  • Enter Admin in the Username textbox and Password in the Password field.
  • If you have changed your password, specify the password that you have created.
  • Click the Advanced tab in the proceeding screen.
  • Navigate to the Router Information tab and tap the Reboot option.
  • Wait for at least 2 minutes so that the rebooting process to finishes.
how to restart netgear router

How Do I Restart My Router Netgear

There are various methods available to restart the Netgear router. Below mentioned are a few ways on how to restart the router.

METHOD-1

  • The first method is to enable the remote access feature.
  • This will enable you to access the router from anywhere.
  • With the help of cloud access, you can manage your router’s key settings from your mobile phone.
  • You should be connected to the Netgear router to turn on the Remote Access feature.
  • Follow the below-given steps to enable the feature.
  • Link your mobile phone to the Wi-Fi network of the router.
  • Go to the Play Store and search for the Netgear Genie app.
  • From the results displayed, click on the Genie app and then tap the Install button.
  • After installing, open the app and enter the Admin Password of the router.
  • Press the Login button, and the Dashboard will be displayed on the next screen.
  • Select the Remote Access option.
  • Slide the bar near the Remote Access option to enable it.
  • After enabling it, you can Restart the router from the app.

METHOD-2

  • The first step is to shutdown the computer. To do so, go to the Start option and click the Power button.
  • Tap the Shut Down option in the next pop-up menu to turn off the computer.
  • Do not restart the computer. The system must be shut down to carry out this process.
  • Dislink the power cable from the router for at least 10 seconds.
  • Avoid using the button present on the modem to restart. Disconnecting it from the power supply is the best way to turn it off.
  • Leave both your computer and router idle for at least 2 hours.
  • This lets you fix network issues in no time.
  • Associate the router with the power supply. Turn it on using the Power button.
  • Wait patiently until the router connects to the Internet. Since you have turned it on after a long time, it might take a longer time than usual to connect.
  • Switch on your computer in the next step. Connect the computer to the same Wi-fi network as your router.

How To Restart Netgear Router N150

  • The Netgear n150 router can be restarted by using the following method.
  • The instructions given below are about how to renew the IP address and solve certain issues. The same method can be used to renew the IP address of the router.
  • Turn on your Windows computer and click on the Start button present in the bottom left corner of the screen.
  • In the search bar, enter Command Prompt and select the Enter button.
  • The computer will start searching and display the results for the command prompt in a few seconds.
  • Click on the Command prompt option to open it.
  • After opening the Command window, key in ipconfig. Once you enter this command, the IP information of your computer will be displayed.
  • Press the Enter button. After some time, information related to network configuration will be displayed on your screen.
  • Check the Current IP address. An array or numbers displayed next to the IPv4 heading is the IP address.
  • Next, type ipconfig/release and hit the Enter button. You will be disconnected from the Internet.
  • Wait for a few minutes and then enter the ipconfig/renew command to restore the IP address.

How To Restart My Netgear AC3200 Router

  • To reboot your computer, perform the below-given steps.
  • Shutdown the computer by navigating to the Start button and selecting the Power icon.
  • Unplug the router from the power supply. Do not use the button available on the router to restart.
  • The computer and router should be turned off for at least 2 hours. This process will power cycle the router.
  • Re-connect the router to the power supply. Turn on the router by tapping the Power button.
  • Wait until the router connects to the Internet. This may take a few minutes as it will remain idle for a few hours.
  • Turn on your computer, select the Power button and wait until it turns on.
  • Go to the Wireless icon present at the bottom-right corner of the screen.
  • Enable it, and the computer will start searching for the list of available networks.
  • Select the network to which your router is connected to.
  • Enter the password or security key to connect.
  • Once you enter the correct password, you will be connected to the wireless network.
  • At the end of this process, your router will reboot successfully.

How To Restart Netgear Router N300

  • Connect your computer to the router and open a web browser of your choice.
  • Go to http://www.routerlogin.net to initiate the rebooting process.
  • The next window that is present will ask you to enter the credentials. The username that needs to be entered is Admin and the password is Password.
  • If you have recently changed the password, then enter the credentials you know. After you enter the configuration page, click the Advanced tab and then select the Advanced Setup option.
  • Choose the Router/Repeating Mode option. Select the Router mode in the next screen.
  • Tap the Apply button. The router will start rebooting and enter the Router mode.
how to restart netgear router n300

How To Restart Netgear Router N600

  • Turn on your computer or mobile.
  • Launch a web browser on your computer by double-clicking on its icon and enter the following link: http://www.routerlogin.net.
  • Before entering the configuration page, you will be prompted to type the user name and password.
  • In the user name field, enter Admin and specify Password in the password filed.
  • On entering the configuration page, you should click the Basic Settings tab.
  • Do not make any modifications to the settings available in that window.
  • Click the Apply or Save button present at the end of the screen.
  • This will reboot the router and save the settings you had set.

How To Restart Netgear Router WGR614

  • You can make use of the Remote access option to restart the router.
  • It will give you access to the router through the cloud and you can manage the router from anywhere.
  • Associate your mobile to the router’s Wi-Fi network.
  • Unlock your phone and go to the Play Store if you have an Android phone. If you have an iOS device, visit the App store.
  • Search for the Netgear Genie app and click the Install button to install it on your computer.
  • In the next prompt that appears, enter the Username and Password correctly.
  • On the Dashboard that displays, select the Remote Access option.
  • Tap the slide bar near the Remote access option to turn it on.
  • Now you can restart the router from your mobile.

How To Restart Netgear Router WNDR3400

  • Remove the USB drive from the slot before resetting the modem’s router.
  • Find the Reset button on the hind side of the router.
  • Make use of a paper clip or a similar object and long-press the Reset button for seven seconds.
  • After a while, release the button.
  • Refrain from proceeding until the modem router restarts.
  • The default settings of the router are restored.
  • Create the backup of the router and then start the rebooting process.

How To Restart Netgear Router WNDR3700

  • Locate the Recess button at the rear of the router.
  • You can find Reset or Restore Factory Settings label on the router.
  • It is a tiny button, press it to avoid unwanted resets.
  • Make use of a paper clip to insert it into the recess.
  • Long-press the button for about 7 seconds.
  • The power light starts to blink on the router.
  • After a while, release the button.
  • Check if the power light on the router remains stable.
  • Find the Wireless or WPS button on the router.
  • Long-press the Wireless and WPS buttons simultaneously for six seconds.
  • The Power light blinks red.
  • Release the buttons to reboot the router and the power LED remains stable.

Configure Netgear Router R6300V2 To Restart

  • You can reconfigure the router to its factory settings.
  • Perform the hard reset of the router using the steps below.
  • Unplug all the cables connected to the router.
  • Detach the power cable from the router.
  • Long-press the Reset button for 20 to 30 seconds.
  • The power light should blink while you are holding it.
  • Refrain from proceeding until the power light stops blinking.
  • After a while, reinsert the power cable to the router.
  • The router resets successfully.
  • Launch the web browser and check the internet connection.

How To Restart Netgear Router R8300

  • You can reboot the router with the help of the router’s interface.
  • Launch the web browser on the computer or Wi-Fi Device.
  • Key in the http://www.routerlogin.com in the address bar.
  • It helps you to access the router.
  • Type the admin as username and password as password.
  • If you have changed the password, type the new password.
  • Select the Advanced option. Choose Reboot under Router Information.
  • Refrain from proceeding until the router completes the process.
  • After the reboot process is done, press the Power button to turn it on.
  • Rebooting the router can be done if the device does not work correctly.

NetGear Router Keeps Restarting How To Fix It

  • Update the router’s firmware.
  • Download the firmware of the router and save it to the desktop.
  • After a while, try to update the router to fix the issue.
  • Select the Settings -> Administration ->Firmware Update.
  • Choose the Upload option from the list to start the firmware update.
  • Updating the firmware improves product performance and new features.
  • Open the web browser and type http://www.routerlogin.net.
  • Provide the username as admin and the default password as password.
  • Select Advanced -> Administration. Click Firmware Update -> Check.
  • Click the Yes option to update the firmware.

Related Searches

How To Find Your Router Password ?

  • Obtain the router’s password from its rear.
  • Find the network name and password from the documentation of the Internet Service Provider.
  • If you are using a Windows system, open the Network and Sharing center option.
  • Right-click the Wireless Network icon on the notification area.
  • Select the Open Network and Sharing Center option.
  • View the current Wi-Fi network name in the list.
  • Locate the Wireless Properties option in the Wi-Fi Status window and click on it.
  • Choose the Security tab and enable the Show Characters checkbox to see the hidden password.
  • Press the Command and Space to open the Keychain Access. Press Enter to launch the app.
  • Find the network name in the list. Press the Info button on the bottom of the window.
  • Click the Show Password in the window.
  • Type the username and password.

How To Reset A WiFi Router ?

  • Resetting the router is done when the administrator forgets the password.
  • If the router is reset to factory defaults, all the settings are restored.
  • Follow the steps below to reset the router.
  • Long-press the Power button at the rear of the device to turn it on.
  • It is located on the back or bottom of the router.
  • Use a sharp clip to press the Reset button for 30 seconds.
  • After releasing it, refrain from proceeding for 30 seconds so that the router gets fully reset.
  • If this method does not work, long press the Reset button for 90 seconds and then turn it on.

How To Log Into A Netgear Wireless Router ?

  • Open a web browser on the system that is linked to the router’s network.
  • Key in the login address into the web browser’s address bar.
  • Find the default IP address of the router.
  • Press Enter -> Search. Type the user name and password in the router login password.
  • The router's username and password is admin and password respectively.
  • Check if the credentials are case-sensitive.
  • If you forgot the password, it is necessary to recover it.
  • To recover the password, link the system to the router’s password.
  • Type the router’s address in the address field of the browser.
  • Wait for the login window to display and select the Cancel option.
  • A window displays for Router Password Recovery. Type the router’s serial number.
  • Click Continue and then answer the security questions.
  • Choose the Continue option for the admin password to display.
  • Type the new password and tap OK ->Log in. Wait until the basic Home screen displays.

Why Do You Need To Reboot A Router ?

  • If the Internet connection goes down, unplug the device.
  • Reboot the router If you wish to change the IP address or network settings.
  • If there is an issue with the router, you need to restart it and follow the above steps of how to restart Netgear router.

Related Articles

Top