How To Set DLink Password

To safeguard your router, it is a best practice to change the router’s password at regular intervals. During the router installation, you will be provided with the default username and password. It is recommended to change the default credentials. Changing the username and password can be done by just doing the simple steps of how to set DLink password. Before you start to change the password, note your D-Link router’s IP address. Remember to assign a strong password with alphanumeric characters so that you can avoid network insecurity. You can launch the D-Link setup page to set a new password. You can also login to your D-Link account to change the network password.

Quick Steps For How To Set Dlink Password

  • Power on your computer and launch a web browser.
  • In the Address bar, enter the D-Link router’s IP Address with the prefix http://.
  • The default IP Address for the D-Link router is 192.168.0.1.
  • An Authentication page will appear on the screen.
  • Enter the Username and Password in the respective fields.
  • The default Username is Admin. Leave the password field empty.
  • Click Login and select the Setup tab at the top panel.
  • Select the Wireless Settings menu and click the Manual Wireless Network Setup.
  • Scroll down the page and go to the Wireless Security Mode tab.
  • In the Pre-Shared Key field, enter the new password and click Save Settings.
how to set dlink password

How To Set Dlink Router Admin Password

During the D-Link router installation, the Internet Service Provider (ISP) will provide you the username and password. It is recommended to change the initial settings on your router with how to set DLink password. To change the admin password on your D-Link router, you can launch the D-Link router’s setup page or go to https://eu.mydlink.com.

Method 1

The first method to change the password is by launching the setup page. On your computer or smartphone, start an internet browser. Go to the D-Link router’s manufacturer’s site and enter the IP Address. If you do not know the IP Address, click the Start menu on your computer. Type CMD in the search box and select Command Prompt. A new dialog box will appear on the screen. Enter ipconfig and tap the Enter key. You will notice the router’s IP Address next to the Default Gateway menu. The IP Address of the D-Link router is 192.168.0.1. On the Authentication page, enter admin in the Username field. Leave the password field blank and select Login. Navigate to the Setup tab and click Wireless Settings. Now, select the Manual Wireless Network Setup and scroll down the page to the Wireless Security Mode tab. In the Pre-Shared Key field, enter the new password and click Save Settings.

Method 2

Power on your computer and router. Connect the computer to the D-Link router and launch Google Chrome. In the Address bar, type https://eu.mydlink.com and tap the Enter key. Log in to your existing MyD-Link account using the ID and password. Click Sign In and you will be directed to the D-Link home page. Under the My Devices tab, choose your D-Link router from the list displayed. Select Settings and go to the Basic Settings tab. Select the Show Password check-box to view the password. Enter the new password and click Apply. Choose Apply to save changes. It will take up to 80 seconds to update the password.

How Do I Set A Password For My Dlink Router

  • For how to set DLink password, Power on your computer and D-Link router.
  • Note down the D-Link router’s IP Address.
  • Launch an internet browser like Google Chrome on your computer and type the router’s IP Address.
  • Tap the Enter key and you will be directed to the Authentication page.
  • On the Authentication page, type the username and password in the respective field.
  • The default username is admin. Leave the password field blank.
  • Click Login and select the Setup tab.
  • Select the Wireless Settings option on the left side and choose the Manual Wireless Network Setup.
  • Scroll down the network page and locate the Wireless Security Mode tab.
  • In the Pre-Shared Key field, enter the new password and click Save Settings.
  • If the above method is not effective, go to https://eu.mydlink.com.
  • Enter your username & password in the respective fields and click Sign In.
  • Under the My Devices tab, choose your D-Link router.
  • Go to the Basic Settings tab, and enter the new password in the respective field.
  • Select Apply to save the new password for your D-Link router.

How To Set Password On DLink Router Dir 615

  • Open the browser on the PC that is connected to the network.
  • In the address field, enter 192.168.0.1.
  • Now tap the Enter key which is present on the keyboard.
  • Enter admin in both the Username and Password fields.
  • Long press and hold the Reset button on the access point if you are unable to sign in to the account.
  • Wait for at least forty seconds and then release the Reset button.
  • Once the D-Link DIR 615 router restarts completely, enter the username and password in their respective fields.
  • Select the Setup button and click on the Wireless Settings option available on the left pane.
  • Else, choose the Wireless tab directly.
  • Now select the Security Mode option and tap the Enable WPA2 Wireless Security button.
  • Click on the Passphrase field and type the key that you want to use.
  • Mention the new password in the Confirm Passphrase box. Finish the process by selecting the Save Changes option.

DLink DCS-5222 Set Password

  • Obtain the IP address of the D-Link DCS-5222L router.
  • Go to any web browser on your system and type the D-Link DCS-5222L router’s IP address in the search bar.
  • Locate the Enter key on the keyboard and tap it.
  • Mention admin in the Username field and make sure that nothing is entered in the Password box.
  • Select the OK button and click on the Setup menu available on top of the computer screen.
  • Choose the Wireless Settings button located on the left side of your desktop.
  • Click WPA Personal Encryption in the Security Mode drop-down list.
  • Select the type of WPS security that you want to use.
  • It is suggested to utilize WPA2 or WPA as the type of security.
  • In the Pre-Shared key area, enter the password and then click on the Save Changes option.
  • The password must be entered to establish the connection between your device and router to finish the process of how to set DLink password in DCS-5222L router.

DLink Dir 515 Set Admin Password

    The steps to change the D-Link DIR 515 router’s password through the Graphical User Interface are as follows.
  • For previous firmware versions, access any browser and enter 192.168.10.1 in the address field.
  • By default, admin is the password for all the routers.
  • Select the Login button and then click on the Advanced tab.
  • On the left pane of the pop-up screen, the Users button is present, click on it.
  • Choose the Users option again and click Admin User, and then select the Edit button.
  • Click the Check to Edit option, then enter your new password, and then retype it again to confirm the same.
  • Complete the process by choosing Save Settings.
  • For newer firmware versions, open the browser and type 192.168.10.1.
  • The predefined password and username for D-link routers is admin.
  • Select Login and click on Security, and then choose the Authentication option.
  • Click on the Internal User Database button and select Users.
  • Right-click on the Admin button and select Edit.
  • Enable the Edit Password feature. Type the currently used administrator password.
  • Enter the new key and retype it to verify the same, and then select Save.

DLink WBR 1310 Can't Set Password

  • Try updating the firmware of your D-Link WBR 1310 router.
  • The firmware of the access point is stored in the flash memory.
  • Launch the web browser from a Personal Computer that is bridged with the Wireless Fidelity network.
  • Sign into the Configuration web page of your D-Link WBR 1310 router and a Login dialog box opens on your computer screen.
  • Enter the router’s username as admin and the password is password.
  • Both the username and the password are case sensitive.
  • The Basic Home Page displays on your desktop.
  • Choose the Advanced option, then select Administration, and then click on the Firmware Update button.
  • The Router Update page opens on your system, select the Check button, and then choose the Yes option.
  • After the firmware update is completed, check if you can set the password.
  • If the error persists, check the status of your Internet connection.
  • Try deleting the configuration settings of your D-Link WBR 1310 router and reconfigure it, and then set the password. Get more information regarding how to set DLink password, from our techies guidelines.

Related Articles

Top