How To Setup Belkin Router WPS?

how to setup Belkin router WPS

WPS, or the Wi-Fi Protected Setup, is a hardware feature that’s built-in with many modems and routers of recent times. This feature allows the network devices to get connected to the wireless networks without entering the network credentials. WPS enables the end-users to securely connect to a Wi-Fi network, using the WPS PIN, or else by pushing a button, that’s called the Push Button Configuration (PBC). Follow these steps to know how to setup Belkin router WPS feature to connect with various devices.

Connecting using the WPS Push Button Configuration (PBC)

  • Push the WPS button on the Belkin router and hold it for about two seconds.
  • The WPS light will glow to notify that the WPS connection has been initiated.
  • Similarly, push and hold the WPS button of the device that you want to connect, within two minutes of time.
  • The router will automatically exchange a security key and thus establish a wireless connection.

Connecting using the WPS Push Button Configuration (PBC) on the web-based setup page

  • Open the default web browser on your device that is connected to the Belkin router.
  • Enter the web address http://www.Belkin.range in the address bar and press ENTER.
  • Click the Wi-Fi Protected Setup option under the Extended Network Settings.
  • On the Wi-Fi Protected Setup (WPS) page, click Start PBC under the Push Button Configuration method.
  • You have to push and then hold the WPS button of the connecting device within two minutes of the time.
  • This will establish a connection between the Belkin router and your device so continue reading to how to setup Belkin router WPS.

Using WPS PIN

  • Make a note of the WPS PIN of the connecting device and enable WPS on the device by pressing the WPS button.
  • Launch a browser, then go to the web-based setup page of the Belkin router.
  • Under Extended Network Settings, click on the Wi-Fi Protected Setup option.
  • Now, navigate to the Wi-Fi Protected Setup (WPS) page and enter your device’s WPS PIN, just under the Enter Client Device PIN field. Click Enroll to proceed with the secured setup configuration.
  • Sometimes, your device might prompt for the WPS PIN of the router. In such a case, make a note of the router’s WPS PIN from the web-based setup page and enter it on your device when prompted.
  • Now, both the router and your device will be connected wirelessly using the WPS PIN.

Kindly contact our technical experts to know how to setup Belkin router WPS.

Related Articles

Top