Linksys Ea6900 Smart Wi-Fi Ac1900 Router Setup - Complete Guide

Linksys EA6900 Smart Wi-Fi AC1900 is a Dual-Band router that provides a seamless Internet connection by routing the network traffic to correct ports. The Linksys EA6900 Smart Wi-Fi AC1900 router setup is quite simple and easy if you follow the quick steps given below.

Before starting the router setup, connect your DSL modem directly to your Windows computer using a standard Ethernet cable.
Check if you have a stable Internet connection on your computer. If so, disconnect the Ethernet cable from the modem and turn it off.
Unpack your router and connect it to your modem using the supplied Ethernet cable. The Ethernet cable should be connected to your router's WAN port.
Turn on your modem after connecting its power adapter to an electrical outlet.
Once the modem is turned on, turn on your router and wait for the LEDs to start blinking.
Next, connect your router's LAN port and the computer's Ethernet port using another Ethernet cable.
You have now completed the Linksys EA6900 Smart Wi-Fi AC1900 router's hardware setup.

On your Windows computer, launch the default browser and enter your router's IP address in the URL field. Hit Enter to open the Linksys Smart Wi-Fi Sign In page.
You can identify your router's IP address from its label located at the backside.
Enter the default login password (admin) in the Access Router field and click the Sign In button.
Click the Connectivity tab under the Router Settings section from the left-side panel.
Go to the Internet Settings tab and choose either PPPoE, Static, or Dynamic as your Internet connection type.
To secure your Wi-Fi network, change the SSID and network key.
After configuring the required network settings, click the Save button.
You have now seen the Linksys EA6900 Smart Wi-Fi AC1900 router setup.