How To Configure Linksys Router Extender Setup?

 Linksys Router Extender Setup

A Wi-Fi extender or repeater can be used to increase/expand the coverage area of a Wi-Fi network. Carry out below-mentioned the steps on how to configure Linksys Router extender setup.

A Linksys Wi-Fi extender does the following three operations:

  • It receives the existing Wi-Fi signal.
  • It amplifies the signal that it has received.
  • Finally, it transmits the amplified signal.

Now, to set up your Linksys router extender, make use of the instructions given here:

  • First, get hold of an Ethernet cable. Next, use this cable to connect your computer and the Ethernet port of the range extender.
  • Now, connect the range extender to the electrical outlet. You have to make sure that the LED light remains stable.
  • Note: Make sure that you plug in the range extender halfway between the Linksys router and the area to which you want to extend your Wi-Fi signal.
  • Open the default web browser on your computer and go to the address bar. Here, type in the IP address of your Linksys router.
  • You will now see a new window requesting your Username and Password. You can just leave the Username field empty. In the Password field, type admin.
  • You can now click on the Log In button.
  • Next, choose the Wireless option. Then, click the Basic Wireless Settings option.
  • You will see a radio button. You can set it to Manual. Then, type in your Linksys router extender setup.
  • Select the security settings such that they are the same as the settings in the Wireless Security section.
  • Now, you need to type in the WEP Key or the passphrase in the Search bar.
  • Click on the Save Settings button.
  • Now disconnect the power cable from the router and the range extender and leave them for 30 seconds.
  • Wait patiently until the lights become stable.
  • After you reconnect the range extender, you have to find the PUSH button on it.
  • Now, using the button, you have to connect the extender and the router.
  • You have the facility to use the Spot Finder to place the router and range extender in the proper positions.
  • You can now finish by completing the required connections.
  • Now, you have successfully to configure Linksys router extender setup.

Related Articles

Top