Configure Linksys Voip Phone Adapter With Router Setup

To know how to configure Linksys VOIP phone adapter with router setup, refer to the easy instructions mentioned on our web page.

Your router should be connected to your ADSL or cable internet modem.

Connect a touch-tone phone to the phone jack that is present at the back of the adapter.

Establish a connection between the Ethernet port of the Linksys phone adapter to the rear side of the router using an Ethernet cable.

Plug the Linksys adapter into an electrical outlet.

Go to the phone that is connected to the Linksys adapter and press the star key four times.

Use the phone’s keypad to dial 110# and wait until you hear a voice message.

This message includes the IP address. Make sure to note it down.

Check if your computer is connected to an active as well as a stable internet connection.

Open the default web browser on the computer.

Navigate to the address field, type the IP address that you took note of from the voice message, and press the Enter key on the computer’s keyboard.

The configuration web page will be displayed on the screen.

Click the Admin Login tab on the upper-right end.

When prompted, you have to enter the login password.

Select the Switch to Advanced View option and navigate to the System tab.

When the System web page opens, fill the Primary DNS and Secondary DNS fields correctly.

Once you provide the valid detail in the Primary NTP Server field, select the Save Settings option.

If you have specific values, go to the SIP tab and fill the required fields.

Navigate to the Line 1 tab, provide the necessary information, and click the Save Settings button.

Click the Line 2 tab and type a second phone number that you want to use with the VoIP system.

Make a call to your phone that is connected to the Linksys adapter and then check if the configuration is done correctly.

To test the second line, connect another phone to the phone jack.

If you need a remote assistance from our technical experts to configure Linksys VOIP phone adapter with router setup, click the call button.

Configuration Of Linksys Voip Phone Adapter With Router Setup