The Netgear extender won't Connect to Router if you face either of the following steps
The extender light will blink orange
Wi-Fi router is not configured properly
Lost internet connectivity
Partial reset of extender
The extender is not setup properly
Follow these troubleshooting techniques to resolve the extender connection issue
Solution 1: Basic check
Check and see if the router and extender are adequately connected.
Check if the extender LED lights are lit green.
The router and the extender should be in the same room.
The extender’s hardware should not be faulty.
Solution 3: Power cycle
Unplug the extender from the socket.
Wait for sometime.
Plug the extender back into the power outlet.
Turn on your extender.
Solution 2: Extender placement
The router and the extender should be set in the same room.
There should not be any interference between the router and the extender.
Remove any metallic items and other electronic devices near the extender.
Solution 4: Recheck your connection
Most of the time, connection problems are caused due to improper connections between your router and extender.
Make a wired connection between your extender and router instead of connection.
Use a brand new Ethernet cable that is not damaged.
If your extender requires a browser login, ensure that you connect your laptop or computer.
You can also factory reset your extender if the connections are secure and there is still no connectivity. If you need a remote assistance to resolve Netgear extender won't connect to router issue, click the call button available on the screen.