Netgear Router Internet Light Blinking Green

When you turn on your Netgear router, the Power LED light will blink for about 20 seconds. After that, you can see the Power LED light turns into solid green. Now, if the Netgear Router Internet Light Blinking Green, then it indicates no internet connection. Most of the Netgear router users experience this issue frequently. Some users find, the factory reset process solves this issue.

  • Before trying the factory reset process, check if the coaxial cable is connected securely.
  • If not, connect the cable securely, and then check if the issue is solved.
  • If not, reset your Netgear router as instructed below.
  • On your Netgear router, locate and press the Reset button using a paper clip for about seven seconds.
  • After that, release the Reset button.
  • Now, your Netgear router will start to reboot.
  • Once the factory resetting process is completed, re-configure your Netgear router from the beginning.
  • If the Power LED light of your Netgear router is blinking in green, then it may due to corrupted firmware. Some users encountered this issue while resetting their Netgear router or updating the router’s firmware. You can fix the issue by installing your Netgear router’s firmware via a TFTP connection.
  • First, enable the TFTP client protocol on your computer if it is disabled.
  • After that, install your Netgear router’s firmware on your computer.
  • If you wonder, what is TFTP? It is nothing but a protocol built-in most of the Windows computers.
  • By using this protocol, you can transfer files from or to a remote computer.
  • By default, Trivial File Transfer Protocol or TFTP is disabled on the Windows 10, 8, 7 computers.
  • You can enable it if required.
  • To do it, go to your Windows 10 computer’s Control Panel section.
  • Click the Programs & Features option.
  • Now, search for the Turn Windows features On or Off option on the Program and Features screen.
Netgear Router Internet Light Blinking Green

  • Once you find it, select it.
  • Now, the Windows Features panel will open up.
  • In this window, look for the TFTP Client folder and select it by ticking the checkbox beside it.
  • Click the OK button.
  • Now, the TFTP Client installation and the activation process will be initiated on your computer.
  • Once the installation is completed, you will get a notification message.
  • After that, you can update your Netgear router’s firmware on your Windows 10 computer.
  • To update your Netgear router’s firmware, first, download the latest firmware file from its official site.
  • After downloading the latest firmware file, open it and begin the update process.
  • If the Netgear Router Internet Light Blinking Green after troubleshooting, contact our technical support team.

Related Articles

Top