How To Use PBC Button On Belkin Router?

The Belkin router has a built-in WPS feature that helps to configure a wireless network from a computer or any other device. This WPS feature provides the following user-friendly front-end to encryption technologies. Carry out the below mentioned steps to use PBC button on Belkin router.

These technologies help to prevent unauthorized devices from accessing your wireless network.

WPS (Wi-Fi Protected Setup)

  • This helps users to have a secure wireless connection using a PIN or Push Button Configuration (PBC) method. You can prefer any one of these methods for configuration.
  • The steps to use the WPS PBC (WPS Push Button Configuration) method on the Belkin wireless router are given below.

Step 1

  • Enable WPS PBC on your computer or any other wireless device that you want to connect to the Belkin router wirelessly.

Step 2

  • Within two minutes, locate the WPS button on the router and press it.
  • Hold this button for about two seconds.
  • The WPS LED on the router’s front panel starts to blink.

Step 3

  • If the wireless connection is established successfully, the WPS LED turns solid white.
  • After a few seconds, this LED turns off.
  • Note: If the wireless connection is not established, the WPS LED will flash amber. Repeat the same procedure to connect again.

By default, the WPS feature is enabled in the Belkin router. To check if this feature is enabled, perform the following steps to use PBC button on Belkin router.

  • Establish a wired connection between the Belkin router and your computer/laptop.
  • Note: The Ethernet cable used for the connection should not be damaged.
  • On the computer, open Google Chrome or any other internet browser.
  • Enter the router’s IP address in the address bar.
  • When prompted, provide the router’s admin user name and password.
  • Once the router’s web interface page opens, navigate to Wireless and select the Wi-Fi Protected Setup option.
  • Enable the WPS feature if it is disabled and then save the changes.
PBC Button On Belkin Router

Related Articles

Top