Technicolor Router Internet Flashing Red

The LED lights on the Technicolor router specify the status of various activities of the router. There are various LEDs on the Technicolor router like Power LED, Ethernet LED, Broadband LED, Internet LED, Wi-Fi Switch, and WPS switch. All these LEDs may change to different colors like orange, green, and red on various stages of the activities of the router. The Internet LED on the Technicolor router denotes the status of the Internet-related activities. This LED may light up as Solid Green, Green blinking, flashing Red. The Technicolor router internet flashing red specifies the ‘Internet connection setup failed’ status. In such scenarios, perform any of the following solutions.

technicolor router internet flashing red

Solution 1:

Usually, when the Internet LED is red, you can fix this issue by rebooting the router. Follow the below steps to reboot the Technicolor router.

  • Turn off the router by pressing the Power button.
  • Unplug the power cord from your Technicolor router.
  • Wait for a minute. Plug the power cord into the router to solve Technicolor router internet flashing red.
  • Then, turn on the Technicolor router.
  • Wait for about 30 minutes till the router reboots.

Solution 2:

When the Internet LED on your Technicolor router internet flashing red, as it is due to the internet connection failure. You can check with your Internet Service Provider whether there is any fall-out in the ISP’s internet connection.

Solution 3:

If the steps given above did not help, then you can reset your router as the final option. When the router is reset, it will erase all the changes made to your router. Follow the below steps to reset a Technicolor router.

  • Keep your Technicolor router turned on.
  • Locate the Reset pinhole from the backside of the Technicolor router.
  • Using a paperclip or pin, press and hold the Reset button for about 7 seconds.
  • Release the reset button when the power button on the technicolor router turns red.
  • When the reset is complete to solve Technicolor router internet flashing red, the Power LED will turn Green.

Related Articles

Top