TP-Link Archer C3150 V2 Router Setup - Complete Guide

TP-Link Archer C3150 V2 Router Setup

Scroll down this page to know how to perform the TP-Link Archer C3150 V2 router setup for the first time. Looking to upgrade your network with a high speed and range router, then the TP-Link AC3150 V2 will be the right choice. This router is powered by 4*4 MIMO technology and is excellent in delivering exceptional range and speed. Some of the features of this router are listed below:

  • NitroQAM and 4-stream for maximum Wi-Fi speed
  • Full coverage
  • Easy setup and use
  • Provides a USB 3.0 port and a USB 2.0 port
  • Supports Dynamic IP/Static IP/PPPoE/PPTP/L2TP
  • Easy to upgradethe firmware

Learn how to perform the TP-Link Archer C3150 V2 router setup in the step-by-step instructions given below.

Position your TP-Link router

  • Make sure that you’ve unpacked the router properly and Place the router near apower outlet.
  • Avoid placing the router in a place where it will be exposed to moisture or excessive heat.

Hardware setup

Method 1: Using an Ethernet cable

  • Make sure to install the antennas on your router first.
  • Connect an Ethernet cable directly from the wall to your router.
  • Now, turn on the router.
  • Check if the Power, 2.4 GHz, 5GHz, and internet LEDs are blinking on your router’s control panel. If yes, continue with the TP-Link Archer C3150 V2 router setup.

Method 2: Using a DSL/Cable/ Satellite modem

  • Install the router’s antennas first.
  • Turn off and unplug the modem from the power outlet.
  • Make sure to remove the modem’s backup battery if available.
  • Connect your TP-Link router to the modem using an Ethernet cable.
  • Turn on the modem first. and Leave the modem to complete the initial bootup.
  • Once it is done, turn on your router.

Check whether the following LEDs are blinking on your router’s control panel: Power, 2.4 GHz, 5 GHz, and the Internet.

Connect your computer or mobile phone to the router

Method 1: Wired

  • Disable the Wi-Fi option on your computer first.
  • Connect the TP-Link router directly to your computer using an Ethernet cable.

Method 2: Wireless

  • Enable the Wi-Fi
  • Look for your router’s SSID in the available networks list.After selecting the SSID,enter its password in the given field if prompted.

Method 3: WPS

  • Turn on the WPS feature on your smartphone.
  • Press the WPS button on the router.

You’ve reached the final step of the TP-Link AC3150 V2 router setup.

  • Open a web browser and navigate to the following page: net.
  • Click the Quick Setup .Then perform the on-screen instructions to complete the router setup.

If you have any queries related to the TP-Link Archer C3150 V2 router setup, contact us.

Related Articles

Top