How To Fix TP Link Extender Cannot Connect With The Router?

 Tp Link Extender Cannot Connect With The Router

The TP Link extender cannot connect with the router. However, if the extender doesn’t get connected to your router, then troubleshoot the issue with the step-by-step solution given below.

  • Initially, check whether the extender is connected to the power outlet and turned on.
  • After confirming the power supply to the extender, proceed to upgrade its firmware.

Upgrade the Firmware:

  • On your computer connected to the router, download the latest firmware from the official support page of the TL-Link extender.
  • Now, connect the extender to your computer using an Ethernet cable.
  • Launch the default web browser and go to the extender’s web management page. For this, you have to enter the IP address of the extender.
  • Now, on the login page, enter the user name and password of the extender.
  • Once you are logged in, go to the System Tools option in the left panel and then select the Firmware Upgrade option.
  • Click on the browse button in the main window and choose the downloaded firmware file.
  • Click the Upgrade button to upgrade the extender’s firmware.
  • Once the firmware has been upgraded, reboot the router.
  • The next troubleshooting step is to reset the extender to factory defaults.

Reset the extender:

  • Connect the extender to your computer and log in to the web management page.
  • Now, go to the System Tools option on the left panel.
  • Choose the option Backup & Restore followed by Factory Restore.
  • After resetting the extender, again connect it to your wireless router and check if the TP Link extender cannot connect with the router issue has been solved.

Connecting the TP-Link extender to a wireless router using WPS:

  • Connect the TP-Link extender to the power supply and make sure it is within the range of your wireless router.
  • Once the extender is powered up, press and hold the WPS button on it.
  • Immediately, go to your wireless router and press the WPS button.
  • Now, you could notice the Wireless or WPS LED lit up on the extender.
  • Once the extender gets connected to your router, place it in some other location within the range of the router, where the signal is low.

Related Articles

Top