Router-Setup.Co »
How To Setup TP-Link Tl-Wr902ac Router

Tp-Link Tl-Wr902ac Router Setup - Quick Steps

TP-Link TL-WR902AC is a portable router. It is designed for both home and travel. Most importantly, it supports five operating modes: Standard Wireless, Access Point, Client, Range Extender, and Hotspot Router. It is a pocket-friendly router. So, it is easy to carry it with you wherever you go. The simple step-by-step instructions to perform the TP-Link TL-WR902AC router setup are provided on this web page.

Step 1 - Position your router

Place your router in a spot where you can connect it to various other devices and a power source.

Do not keep the router in a location exposed to either moisture or heat (direct sunlight).

You can even place the router on a shelf or desktop.

Make sure that your router is far away from strong electromagnetic interference (Bluetooth devices, cordless phones, and microwaves).

After placing your router in a correct position, continue with the steps to set up the TP-Link TL-WR902AC router.

Step 2 - Connect your router

This router supports five operating modes. Perform one of these methods according to your operating mode choice.

Method 1 - Standard Wireless Router mode

Switch to the Share ETH operating mode.
Connect your router to the Internet. Insert the router’s power cable to a power outlet.

Establish a wireless connection between the router and your computer for TP-Link TL-WR902AC router setup.

Method 2 - Access Point mode

Switch to the AP/Rng Ext/Client mode.
Connect a wired router to the Internet. After that, connect an Ethernet cable between your TP-Link router and the wired router.
Plug the router’s power cable into a power outlet. Ensure that the router is powered up.
Establish a connection between your computer and the router.
Go to the next step to perform the TP-Link TL-WR902AC router setup.

Method 3 - Range Extender mode

Switch to the AP/Rng Ext/Client operating mode.
Insert the router’s power cord into an electrical outlet.
Note: It must be near your host AP.
Connect the router to your computer wirelessly or use an Ethernet cable

Method 4 - Client mode

Make sure to switch the mode to AP/Rng Ext/Client.
Power up your router. And, it should be within the range of your host AP.
Establish a wired or wireless connection between the router and your computer.

Method 5 - Hotspot Router mode

Switch to the Share Hotspot operating mode.
Turn on your router. Ensure that the router is placed within the range of the public hotspot.
Connect your wireless device to the router.

Step 3 - Log in to your router

On the computer connected to the router’s network, set the TCP/IP protocol to the Obtain an IP address automatically mode.
Open Microsoft Internet Explorer, Mozilla Firefox, or Apple Safari.

Visit the router’s login page.
Type admin in both the Username and Password fields.
To access the web-based utility, click the Log In button.

Step 4 - Configure your router

Depending on your operating mode, carry out one of these methods for TP-Link TL-WR902AC router setup.

Method 1 - Standard Wireless Router mode

Click WAN Connection Type.
Select the Dynamic IP radio button and click the Next button.
In the Quick Setup - MAC Clone window, select the Yes, I need to clone MAC address radio button and click the Next button.

Select the 2.4GHz and 5GHz options and click Next.
Create a wireless network name and wireless password.
Click the Next button followed by the Save button to finish the TP-Link TL-WR902AC router setup.

Method 2 - Access Point mode

In the Quick Setup - Operation Mode window, select the Access Point radio button and click Next.
Customize your network name and password and then click the Next button.

Set your LAN type. Or else, leave the default settings for Smart IP.
Click Next -> Finish.

Method 3 - Range Extender mode

Select the Range Extender option and click the Next button.
On the AP List page, click the Connect button. This will connect to the host network.
Customize the network settings and click Next.
Specify the LAN IP type and click Next.
Once you click Finish, relocate the router to complete the TP-Link TL-WR902AC router setup.

Method 4 - Client mode

On the Quick Setup - Operation Mode page, select the Client option and click Next.
To connect to the host network, click the Connect button.
Create a password for your host network.
Set the LAN IP type or leave the default settings.
Click the Next button followed by the Finish button.
Use an Ethernet cable to connect your wired-only device to the router.

Method 5 - Hotspot Router mode

Select WAN Connection Type -> Dynamic IP -> Next -> Connect.
Once done with connecting to the public Wi-Fi, customize the network settings under the Client Setting section.
Also, specify the wireless settings under the Wireless 2.4GHz and Wireless 5GHz sections.

To apply the altered settings, click the Finish button.
After completing the TP-Link TL-WR902AC router setup, you can surf the Internet in your browser.

How To Login Into TP Link Wifi Extender

How To Setup Tp-Link Router Without CD

How To Connect Tp Link Router To Laptop

Top