TP-Link Tl-Wr940N V4 Router Setup - Quick Guide

TP-Link TL-WR940N v4 is a wireless router that provides a maximum network speed of 450 Mbps. The TP-Link TL-WR940N v4 router setup is quite simple if you follow the quick steps given below.

First, make sure you have a working DSL modem.
Verify that you have access toa stable Internet connection from your modem. Disconnect any cables connected to it and start unpacking your router.
Connect your router’s WAN port to your modem’s Internet port using the supplied network cable.
Next, connect the router and the modem to a wall outlet andthen turn them on one by one.
Check whether the Internet connection is stable on your router after connecting it to your modem.
Take another Ethernet cable and connect one end of it to the router’s LAN port. Connect the cable’s other end to your computer’s Ethernet port.
You have now completed half of the router setup.
On your computer, launch the default browser and enter your router’s model number in the URL Hit the Enter key to access your router’s setup page.

Click the Login button.
You can identify the IP address from your router’s label.
If prompted, enter the default login credentials (admin) in the required fields and click the Login
You will be now directed to the Quick Setup page if you are configuring the router settings for the first time.
Choose your Internet connection type on the WAN Connection Type screen and click Next.
If you don’t know which Internet connection type you are using, select the Auto Detect
If you select PPPoE as your WAN Connection type, enter the credentials provided by your ISP.
Complete the initial configuration by following the on-screen prompts.
Alternatively, you can make use of theTether app on your smartphone to complete the TP-Link TL-WR940N v4 router setup.