Router-Setup.Co »
Login TP Link Wifi Extender

TP Link Wifi Extender Login

The TP Link wifi extender login is needed for keeping track of your account. If you have your account, you can access the information whenever you want. You can login to TP Link wifi extender through a web browser. Only when we log in to the Wi-Fi extender, can we access the device. We may get the notification on updates or issues if we have logged in to the TP-Link Wi-Fi Extender. It is primarily used to keep track of your TP Wi-Fi extender account. Below are the instructions to log in to the TP-Link Wi-Fi Extender.

Steps To Login To TP-Link WiFi Extender

Connect the computer to the LAN port of the TP-link with the Ethernet cable.

Assign the Static IP address manually on the computer.

If you don’t know how to assign, follow the below steps to assign. If you have a Windows 7 system, follow the steps here.

Left click the options Start->Control Panel->Network and Internet->Network and Sharing Center->Change Adapter Settings.

Click Local Area Connection-> Properties and then double-click the option Internet Protocol Version 4(TCP/IPv4).

Now, you can set the static IP address as 192.168.1x if your Static IP address is 192.168.0.254.

Open any web browser, type the IP Address of the extender, and press the Enter button.

Type the username and password in the respective fields.

The default username and password are admin. Click the OK option after entering the credentials.

The above IP settings are meant for login for the web-based interface of TP-Link for configuration.

How To Configure My Range Extender

For setting up the Range Extender configuration, check whether you have the following information for TP Link wifi extender login. Lan IP, Encryption type, SSID, and Passphrase.
First, login to TP Link wifi extender Management page.
Select the Network option. Check that the Range Extender IP Address is the same as the IP segment of the router.
You can also change the IP address to 192.168.1.250 and then click the Save option.
lick Quick Setup->Next->Wireless.
Choose Range Extender as the operation mode and then click Search.
Find your router’s SSID from the list, click on it, then tap the Connect option. Press the Save button.
Click Wirelss-> Wireless Security. Choose WPA-PSK/WPA-PSK and Encryption AES and then click the Save option.
To confirm, click the options System Tools-> Diagnostic, type your router’s IP address 192.168.1.254 in the IP address bar, and then click the Start option.
Now, set your computer to obtain the IP address immediately.

Steps To Configure Range Extender With WPS Button

Plug in your Range Extender to a power outlet near your main router.
Press the WPS button on the main router, and then push the WPS button on the Range Extender.
Wait until the WPS button light blinks on both the router and the Range Extender.
If the wireless signal LED of your Range Extender is off even after two minutes, it indicates that the WPS process failed. Try pressing the WPS button again.
Repeat the above process until you succeed. You can keep the Range Extender on the place where you want to extend the wireless network coverage.
Once you plug in the Range Extender, you can enjoy the wireless network connection.

Steps To Login To TP-Link Extender

For TP Link wifi extender login, open any Web browser of your choice like Safari, Internet Explorer, or Google Chrome.
On the top of the browser window, type the default IP address of the TP-Link Modem router like 192.168.1.1 and then press the Enter key.
The LAN IP changes according to the model. Find the IP address at the bottom of the label product.
Now, type the Username and Password in the login page.
The default user name and password for the TP-Link devices are Admin. Enter the password in lower case.
Click the option OK to login to TP Link wifi extender.

Steps For TP-Link Extender Setup

Plug in the TP-Link Extender to the wall outlet.
Connect it to the computer with the Ethernet cable.
Open any web browser on your computer and TP Link login wifi extender to http://tplinkrepeater.net.
Choose the Quick Setup and click the Next option.
Choose your region and click the Next option.
Now, the TP-Link Wireless Extender will scan for wireless networks.
Choose your wireless network from the list displayed and then click the Next option.
Type the wireless password when prompted.
Tap the Copy option on the main router if you want a single large wireless network, or the Customize option if you want to create a different network.
Select the Next option. Now, review the network settings in the final window.
Click the Finish option if the settings are correct.

TP-Link Wireless Extender Setup

Connect the TP-Link Range Extender near your router or the access point.
Wait for the Wireless LED to blink.
On the router, press the WPS or Reset button.
On the TP-Link Extender, press the Power button.
Now, connect the ethernet cable to the extender and the computer.
It is important to disconnect your computer from all the wireless networks during the setup process.
On the system, click the Wi-Fi network options. Select the TP-Link network from the available list.
Open any web browser, type http://tplinkextender.net, and then press the Enter Key.
The Windows Security page opens. Enter the username and the password on TP Link wifi extender login.
Click the OK option.
When the TP-Link page opens, choose the operation mode, region, and then click the option Next.
The Wireless settings page will open. Choose your Wireless network and then click the Next option.
When prompted to enter the password, type your password.
Click Next->Finish. The Wireless Network will connect in two minutes.
Now, plug in the extender back to a power outlet. Turn it On and on the smart signal indicator, check the speed of your network.

TP-Link Wi-Fi Extender Setup

Plug in the range extender to the electrical outlet.
Push the WPS button on the TP-Link router.
Now, press the WPS button on the range extender within two minutes.
After you push the WPS button on your router, it must blink.
If the LED light doesn’t blink again, press the button to make it blink.
The WPS process will take at least two minutes.
Check on the Wireless signal LED of the range extender.
The light should be stable and the number of bars should be high detecting the network strength. If the lights are stable, it means your device is connected.
If the lights are not stable, it means the range extender is still off and the WPS process has failed.
Try the WPS process multiple times to connect.
Place the range extender in the appropriate place to extend the wireless network coverage and enjoy the extended wireless network.
You need not repeat the process. Once it is done, it will connect immediately every time you re-plug it.

TP-Link Wireless Repeater Setup

The TP-Link Wireless Repeater can be set up by two methods. It can be set up by the WPS method or a web browser.

Steps to setup WPS method

Press the WPS button on your router, and then press the WPS button on your TP-Link repeater within two minutes.
Check whether the LED light turns out to be solid blue. The WPS connection is successful only when it turns out to be solid blue.
For connecting to other bands, except 2.4GHz or 5GHz, try the first two steps to connect.
You can now enjoy the extended internet and network.

Steps to setup through Web Browser

Open any web Browser of your choice on your wireless device or computer.
Go to the TP-Link repeater default web address http://tplink repeater.net.
Type the http://tplinkrepater.net on the browser’s address bar.
If you find the tp.linkrepeater.net setup login to TP Link wifi extender window, click on it and enter the default username and password on TP Link wifi extender login.
Go to the Settings option and then click the Network option.
Select the 2.4GHz or 5GHz and save the changes by clicking the Save button.

TP-Link Extender installation instructions

To Setup Using The Web Browser:

Plug in the TP-Link Extender to the power outlet and turn it on.
Unplug any ethernet cord connected to your computer.
Tap the Wi-Fi icon on the taskbar and connect it to the extender’s network (TP-Link- Extender -2.4Ghz -5Ghz).
Launch any web browser of your choice and enter http://tplinkrepeater.net or http://192.168.0.254 on the address bar.
When prompted to type the username and password, create your password for future use and then click the Start option on TP Link wifi extender login.
Choose your router’s 2.4Ghz network and 5Ghz network and enter its password.
Verify the wireless settings and then click the Save button.
For better connectivity, move your extender between the router and the Wi-Fi dead zone area.
Check whether the LED light has turned to a solid blue color. If it has, you are all set to use the TP-Link Extender.

To Setup using WPS button:

he WPS button method is the easiest way to extend your host network.
ou can use this button only if the host router has a WPS button.
lug in your TP-Link Extender to the electrical outlet and then power it on.
ap the WPS button on the router and push the WPS button on the TP-Link extender within two minutes.
f you are connecting the extender to the dual-band router but only the 2.4Ghz or 5Ghz LED is On, then repeat the fourth step.
he LED must turn to solid blue because only then it means that the installation is successful.
f you find no difference or the LED light is off, it indicates that the WPS method failed.
ry repeating the above procedure one or multiple times for setting up the extender via the WPS method.

TP-Link 192.168.0.254:

The 192.168.0.254 is the default gateway IP Address used by many router brands and Wi-Fi repeater devices, modems, and webcam. To log in to the 192.168.0.254 address, follow the given steps below.
Check that your router and Wi-Fi devices are turned On.
Open any internet browser.
Enter 192.168.0.254 or http://192.168.0.254 in the internet browser address bar.
Press the Enter key.
The Admin login to TP Link wifi extender panel should open now.
Enter the username and the password.
The default username and password are admin for TP Link wifi extender login.

TP-Link Extender won't connect:

Check that the wireless network connection of the computer is set to obtain the IP Address automatically.
Press the Windows key and R key on the keyboard simultaneously to run the application.
In the window, type cmd and then click the OK button.
Then type ‘ipconfig- all’ in the next window and then press the Enter key.
To get logged in to the web management page of the router, type http://tplinkwifi.net on the web browser.
Type the username and password and then click the OK option.
The default username and password are admin.
Once you are logged in, check the WAN part of the status page. If your IP address is listed, it means the router is successfully installed and connected to the internet.
If the IP address is not listed, check the hardware connection.
If your TP-Link is not connected still, then reboot your extender. Get more information for TP Link wifi extender login, from our trained tech professionals.