How To Use A Linksys Router As A Wifi Extender

A Router can be used to connect one computer or multiple computers to the internet. Few people connect it directly to their laptop, while others use a Wi-Fi network card to use the net without using any cords or cables. In most of the cases, majority users chose a Linksys router to meet their needs.Linksys is a dual-band router that offers blazing 5GHZ throughput speeds. A Linksys wireless range extender used with the wireless Internet equipment such as a computer system and the wireless routers, the Extenders are used to extend the range of the wireless network connection. If you find that your wireless extender is not working, or displays the error message during the process of how to use a Linksys router as a wifi extender, then you can reset it back to its factory default settings. Restoring your Linksys wireless router extender to its default factory is an easy task that can be done in literally 10 seconds.

Procedure To Connect The Linksys Router Are Listed Below.

  • Check the router’s IP address in a new browser window.
  • Enter your Network password.
  • Now, the Enter Network Password window will open on the screen.
  • Enter OpenDNS addresses in Static DNS 1 and Static DNS 2 fields.
  • Click the Save Settings button.

The Linksys Smart Wi-Fi is an available service that comes with the Linksys Smart Wi-Fi Routers. It used for secure access to your home network from your browser or mobile devices.

Linksys Smart Wi-Fi router

After setting the Linksys Smart Wi-Fi router, you can connect to the internet using a Linksys cloud account and associating your router to it.

Check the steps to log into the Linksys Smart Wi-Fi router.

Following steps are used to access your router and how to use a Linksys router as a wifi extender locally.

  • Launch a web browser.
  • Enter your router’s default IP address of your router, or type “myrouter.local” in the Address bar, then press the Enter button on your computer keyboard.
  • Type your Router password and then click Log in.
  • Mostly, the default password is admin. If you have changed the password, then enter the new security key.
  • Otherwise, you can also log in using your Linksys cloud account. Click the link provided at the bottom of the display screen.
  • When the Linksys Smart Wi-Fi Sign In slide displays, type your Email Address and Password to log in. Click the login button.

Remote Accessing Your Linksys Smart Wi-Fi

Setting Up The Linksys Router As A Wi-Fi Extender

  • For how to use a Linksys router as a wifi extender, make sure you have done the initial router setup.
  • Open a browser on your system. Ensure that the internet connection is available.
  • Enter the router manufacturer’s page URL in the search box.
  • When the Setup page displays, choose your desired language and click Start.
  • The License agreement page opens.
  • Read and respond to the terms and conditions by tick marking the checkbox at the bottom of the window and click the I agree button to resume to the next step.
  • Select Your wireless network option page is displayed.
  • Search for your network, once your network type is displayed, click it.
  • Now, enter the security key for your Wi-Fi network to connect the router to the computer.
  • The extended network type is of 2.4 GHz and 5 GHz.
  • Choose the network extender of your need and click Next.
  • The Make it secure window displays.
  • The secure window asks you to create an admin password, then enter the same username password again, and add a password hint.
  • Enter the required information in the secure window, and then proceed to the next step for how to use a Linksys router as a wifi extender.
  • The admin password created must range from 1-28 characters and click Save.
  • The extender setup is now complete and a dialog box is displayed to check the admin details you entered.
  • In your Wi-Fi connection, check for the setup network.
  • Once you find, click it and then connect.
  • The Linksys Wi-Fi extender is set up successfully.

To use an access point mode feature on the Linksys Wi-Fi router, try these methods.

Sometimes, setting up your Linksys Smart Wi-Fi Router to the Bridge Mode is applicable when you want to:

  • Connect two routers to the same network sharing.
  • Utilize the Router as an additional access point on an end network.
  • Connecting your router to a modem/router from the Internet Service Provider (ISP) is possible.

How To Configure The Linksys Router Using The Bridge Mode Setup?

To establish the Linksys router connection using the Bridge Mode setup to use a Linksys router as a wifi extender, these are the minimum requirements needed to begin with.

  • The main Router.
  • An active Internet connection with your primary router.
  • Two Ethernet cables.
  • A Linksys Smart Wi-Fi Router with Bridge Mode capability.

The Main router can be a modem/router that was provided by your ISP. The Linksys connect software features will be disabled on the router once the Bridge Mode set up is done thoroughly. Follow the instructions to proceed with the setup for how to use a Linksys router as a wifi extender:

  • Link an Ethernet cord from your computer to any of the numbered ports of the router with Bridge Mode capability.
  • Loop one end of the Power adapter to an electrical cord and the other end of the Linksys router.
  • Now, unlock your web browser and enter your router’s IP address in the Address bar, and then press Enter icon.
  • The default IP address of a Linksys packet filter is available in the manufacturer’s site. Visit the website and gather the IP address.
  • The Windows Security display reminds you to enter the router’s username and password.
  • Enter the required details in the respective field displayed and then click OK.
  • Most of all, the default username and password will be admin.
  • As soon as the warning window pop-ups in the screen, click the Do not show me this box again and then click OK.
  • You will now be directed to the router’s web-based setup page.
  • Below the Internet Setup, set the Internet Connection Type to the Bridge Mode.
  • Point the Router Address to Specify an IP address, then type the proper IP address of the router, Subnet Mask, and Default Gateway for the Linksys router, and then click Save Settings.
  • Make sure to check the following things, before configuring your router to Bridge Mode.
  • The Internet IPv4 Address is the address used for the Linksys router. The value of the Internet Address and the Subnet Mask must be on the same range as the main router.
  • The Default Gateway is the IP address of the main router.
  • Now, connect the main router to the Internet port of the Linksys router.
  • The Linksys Smart Wi-Fi Router is now set to the Bridge Mode using the Classic firmware; it can be used as an access point now, which helps extend your wireless network.

Manual Configuration Of Linksys Wireless Extender

The Linksys Wireless Extender lets you repeat the wireless signal of any access point or router to provide Internet connectivity in hard through a wired or wireless connection.

Before starting the setup, make sure that you have done the following ready to use a Linksys router as a wifi extender:

  • Wireless network name (SSID).
  • Wireless channel.
  • Wireless password or security/network key.

Reboot the range extender

  • Gently press and hold the Reset button located at top of the panel of the extender for five seconds or wait for the LED to blink in order to restore its factory default settings.
  • Connect the computer system to the Ethernet port of your range extender using an Ethernet cable.
  • Now, plug the range extender to the power outlet and make sure the LED lights are idle.
  • On your computer, launch a web browser and enter your router’s IP Address.
  • The Authentication window asks for a username and password. Leave the User name place blank and enter admin in the Password field, and then click login.
  • Click Wireless---> Basic Wireless Settings.
  • Set the radio button to Manual, then enter your router’s Network Name (SSID).
  • The Wireless Security section opens, select the security settings that match your router’s configuration. Enter your Passphrase or WEP Key and then click Save Settings.
  • Unlink the power cable of the router and the router extender for 30 seconds. Connect the router first, wait for all the lights to be idle and stable, and then plug in the router extender.

If you cannot access the router’s web-based setup page or forgot the router’s password, you may reboot the router to its default factory settings.

Factory Resetting The Linksys Router

  • If you wish to reset your Linksys router, then try this method:
  • Quietly, press and hold the reset button.
  • After pressing the reset button for 10-15 seconds, release the reset button or the lights on the modem starts to flicker.
  • Wait for three to five minutes so that the Internet light turns green.
  • Try connecting to the Internet.
  • You may be supposed to enter the account related information to reprogram your modem.

Resetting your modem can fix general router issues like gaming troubles, routing errors, internet connection problems, slow connection speeds, port issues, wireless issues, and device conflicts.

factory reset linksys router

Power Cycle The Router

Power cycle means to turn your modem ON/OFF. It will help to improve the slow-moving connection issues, solve the wireless problems, etc. To power cycle the device, use this method for how to use a Linksys router as a wifi extender:

  • Unlink the power cord from the back of the modem and make sure you have unplugged the cable by analyzing that all the lights on the modem are turned OFF.
  • Plug the power cord back to the modem.
  • Stay for the Internet light to turn into green.
  • Try connecting to the Internet.

Setting Access Point Mode On Your Linksys Wi-Fi Router

  • Connect your Ethernet cable port to your computer.
  • Search for the browser on your computer and enter the developer’s URL link.
  • The developer’s Sign In site opens, you will find the Access Router filed to ask for the Router Password.
  • Enter the Router password and then click Sign In.
  • Stay until the page opens and wait for the list of options displays on the left side of the screen.
  • On the Router Setting category, select Connectivity.
  • When the Connectivity page displays, look for the Internet Settings option on the top-menu sets and click on it.
  • Click Edit, select the Connection type as Bridge Mode.
  • Enter the Internet IPv4 address, Subnet mask, Default gateway, DNS 1 information in the respected fields correctly.
  • Click the OK button, then the warning message window opens, read and respond by clicking Yes, and again click OK button to confirm the changes in the system.
  • Link the main router to the Internet port of the Linksys router.
  • Now the complete setup is done.

A Linksys wireless range extender can be used with wireless Internet equipment such as computer and wireless routers. Extenders are used to enlarge the range of the wireless network.

Linksys Router Configuration

  • Open the browser on your computer and visit the router’s IP address.
  • The default IP address is available on the developer’s site.
  • Enter the Network password.
  • The Enter Network Password window will open now. Skip the username field, and enter the default password, and then click the OK button.
  • Make sure you have entered the current DNS setting before switching to the Open DNS if you want to go back to your old settings for any reason.
  • Click the Save Settings button.
  • The window suggests you flush your DNS resolver cache and web browser caches to ensure that your new DNS configuration settings take immediate effect. To get more solution from leading tech experts regarding how to use a Linksys router as a wifi extender, just make a connection with them.
how to use a linksys router as a wifi extender

Related Articles

Top